Honeywell L7000 Frequently Asked Questions

How Do I Program a 5820L to a Lynx Touch Panel if the Serial Isn't on the Label?
If the serial number isn’t listed on your 5820L sensor, you can still learn it into your Lynx panel by auto-enrolling it through the zone programming menu.
Added:

How Do I Add a 5869 to a LYNX Touch or Lyric System?
A Honeywell 5869 can be added to a LYNX Touch or a Lyric system by programming the device to the panel and then installing the device in a desired location.
Added:

What is the Difference Between a Master Code and a Normal User Code?
A master code has the ability to add, edit, and delete other user codes. It can never deleted, only edited. A user code can only arm, disarm, and bypass.
Added:

How Do I Register the Honeywell 3GL?
A Honeywell 3GL cellular communicator can be registered remotely by an alarm monitoring company, or it can be registered on-site at the security panel.
Added:

How Do I Program a Wireless Sensor on my Honeywell LYNX Touch?
Wireless sensors can be programmed to a LYNX Touch system through the panel's zone programming menu. You will need the installer code to access the menu.
Added:

How Do I Know Which LYNX Panel I Have?
The easiest way to tell which Lynx Panel you have is by visually identifying it. Each Lynx panel has certain visual clues that can be used to identify it.
Added:

How Do I Replace an Existing 5816 On My Lynx Touch?
You can replace an existing 5816 by removing it from panel programming, and then uninstalling it from its location. Then program the new 5816 and install it.
Added:

How Do I Activate a Honeywell 5800PIR-RES for Lyric or Lynx Panels
You can activate a Honeywell 5800PIR-RES by programming it into your Honeywell panel. Once activated, make sure to test the sensor in its final location.
Added:

How Do I Delete a Zone from My Lynx Touch or Lyric Panel?
A zone can be deleted in the programming menu of the panel. This is useful for when you no longer intend to use a wireless device with the security system.
Added:

How do I Setup the Honeywell 5800PIR-RES on a Lynx Touch?
In order to setup a Honeywell 5800PIR-RES motion detector, you must first program the sensor into your security panel and then install it onto a wall.
Added: