IQ5 Hub PG AT&T LTE 10-1 Kit Frequently Asked Questions
How Do I Hard Reboot the IQ5 Hub?
Learn how to hard reboot the IQ5 Hub. Press and hold the wake/sleep button on the side for 30 seconds, and use it only when absolutely necessary. Full steps.
What Does Z-Wave Diagnostics Show on the IQ5 Hub?
Learn what Z-Wave Diagnostics shows on the IQ5 Hub: a map of your Z-Wave network, each device's route, and a key chart for signal strength and repeaters.
How Do I Turn Off Auto Bypass on the IQ5 Hub?
Learn how to turn off Auto Bypass on the IQ5 Hub. Go to Installation, Security and Arming, and turn the setting off so open sensors are no longer bypassed.
How Do I Turn Off the Severe Weather Siren Warning on the IQ5 Hub?
Learn how to turn off the Severe Weather Siren Warning on the IQ5 Hub. Go to Installation, Siren and Alarms, and turn the setting off to use the chime instead.
How Do I Turn On Indoor Temperature Reporting on the IQ5 Hub?
Learn how to turn on Indoor Temperature Reporting on the IQ5 Hub. Enable PowerG temperature reporting, then pick the sensor to show on the home screen.
How Do I Turn On the Solar Page on the IQ5 Hub Security System?
Learn how to turn on the Solar Page on the IQ5 Hub. Enable it in Installer/Dealer Settings, then enter your Integrator ID, email, and Project Code. Full steps.
How Do I Turn Off Sensor Voice Announcements on the IQ5 Hub?
Learn how to turn off sensor voice announcements on the IQ5 Hub. Turn off Sensors in the Sound menu, or set Voice Prompts to Off for one sensor. Steps included.
How Do I Replace a Sensor on the IQ5 Hub Security System?
Learn how to replace a sensor on the IQ5 Hub. Delete the old sensor, enroll the new one with Auto Learn, or use Replace to swap the sensor's DL ID. Full steps.
What Does Each Sensor Group Mean on the IQ5 Hub Security System?
Learn what each sensor group means on the IQ5 Hub, from entry-exit delay and instant perimeter to motion, safety, panic, glass break, and water groups.
How Do I Adjust Panel Motion Sensitivity on the IQ5 Hub?
The IQ5 Hub does not have Panel Motion Settings. Learn why, and how a PowerG motion sensor adds motion detection to the system instead. Steps included.
Learn how to hard reboot the IQ5 Hub. Press and hold the wake/sleep button on the side for 30 seconds, and use it only when absolutely necessary. Full steps.
Added:
What Does Z-Wave Diagnostics Show on the IQ5 Hub?
Learn what Z-Wave Diagnostics shows on the IQ5 Hub: a map of your Z-Wave network, each device's route, and a key chart for signal strength and repeaters.
Added:
How Do I Turn Off Auto Bypass on the IQ5 Hub?
Learn how to turn off Auto Bypass on the IQ5 Hub. Go to Installation, Security and Arming, and turn the setting off so open sensors are no longer bypassed.
Added:
How Do I Turn Off the Severe Weather Siren Warning on the IQ5 Hub?
Learn how to turn off the Severe Weather Siren Warning on the IQ5 Hub. Go to Installation, Siren and Alarms, and turn the setting off to use the chime instead.
Added:
How Do I Turn On Indoor Temperature Reporting on the IQ5 Hub?
Learn how to turn on Indoor Temperature Reporting on the IQ5 Hub. Enable PowerG temperature reporting, then pick the sensor to show on the home screen.
Added:
How Do I Turn On the Solar Page on the IQ5 Hub Security System?
Learn how to turn on the Solar Page on the IQ5 Hub. Enable it in Installer/Dealer Settings, then enter your Integrator ID, email, and Project Code. Full steps.
Added:
How Do I Turn Off Sensor Voice Announcements on the IQ5 Hub?
Learn how to turn off sensor voice announcements on the IQ5 Hub. Turn off Sensors in the Sound menu, or set Voice Prompts to Off for one sensor. Steps included.
Added:
How Do I Replace a Sensor on the IQ5 Hub Security System?
Learn how to replace a sensor on the IQ5 Hub. Delete the old sensor, enroll the new one with Auto Learn, or use Replace to swap the sensor's DL ID. Full steps.
Added:
What Does Each Sensor Group Mean on the IQ5 Hub Security System?
Learn what each sensor group means on the IQ5 Hub, from entry-exit delay and instant perimeter to motion, safety, panic, glass break, and water groups.
Added:
How Do I Adjust Panel Motion Sensitivity on the IQ5 Hub?
The IQ5 Hub does not have Panel Motion Settings. Learn why, and how a PowerG motion sensor adds motion detection to the system instead. Steps included.
Added: