Qolsys IQ Panel 2 Plus AT&T LTE, Honeywell/2GIG Compatible Frequently Asked Questions

Does the Qolsys IQ Panel 2 Plus Have an Option for Night Stay?
Although you cannot set the IQ Panel 2 Plus to a Night Stay Arming Mode, there are Sensor Groups you can use to have motion sensors active while Armed Stay. Learn about the IQ2+.
Added:

What is the Difference Between S0 and S2 Z-Wave Protocols?
The S2 Security Protocol is supported by all Z-Wave Plus V2 700-Series devices, as well as certain Z-Wave Plus 500-Series devices. Learn the difference between S2 and S0.
Added:

Why Isn't My S2 Z-Wave Device Working with My Qolsys IQ Panel 2?
Qolsys made the IQ Panel 2 compatible with the S2 Security Protocol in Z-Wave FW Version 6.81.03. But you may also need to upgrade the system firmware. Learn about IQ2 Z-Wave.
Added:

How Do I Use the Alarm.com In-App Panic Feature?
The Alarm.com In-App Panic allows you to send an alert to the central station. Police, Fire, and Auxiliary Panics can be performed. Learn how to use the Alarm.com In-App Panic.
Added:

How Do I Enroll the PowerG PG9914 with a Qolsys IQ Panel 2 Plus?
To enroll the PG9914, put the IQ2+ in its auto-enrollment mode, open the PG9914, press and hold its enroll button until its LED is orange, and release. Learn to enroll the PG9914.
Added:

What is the "Remove All Devices" Option for the Qolsys IQ Panel 2 Plus?
If you choose the Remove All Devices option in the Qolsys IQ Panel 2 Plus Z-Wave Menu, then all programmed Z-Wave devices will be cleared from the panel. Learn about this option.
Added:

How Do I Assign User Codes to Partitions On the IQ Panel 2 Plus?
When creating or editing a user code on the Qolsys IQ Panel 2 Plus, you will assign it to one or more partitions. Learn how to assign user codes to partitions on the IQ Panel 2.
Added:

How Do I Properly Close the Qolsys IQ Panel 2?
When closing the IQ Panel 2, line-up the upper tabs first. Then click the bottom tabs into place. Lastly, check and make sure the upper portion is secured. Learn to close the IQ2.
Added:

How Does Secure Arming Work On the IQ Panel 2 Plus?
When Secure Arming is enabled on the IQ Panel 2 Plus, a user must enter a valid code when they go to arm the system. Learn about the Secure Arming feature on the IQ Panel 2 Plus.
Added:

Why Did My IQ Panel 2 Exit Delay Increase After I Opened My Door?
The IQ Panel 2 uses a feature called Auto Exit Time Extension to automatically increase the Exit Delay if there are two (2) faults of Entry/Exit Zones during the Exit Delay Countdown. Learn about Auto Exit Time Extension.
Added: