Qolsys IQ Panel 2 Plus Verizon LTE, Honeywell/2GIG Compatible Frequently Asked Questions

How Do I Monitor the Temperature of My Pool or Hot Tub On a Qolsys IQ Panel 2+?
You can use a compatible wireless transmitter, like a DSC PG9945, to integrate a digital temperature sensor with your IQ2+. Learn to use your IQ2+ to monitor your pool or hot tub.
Added:

Why are the Disarm Photos so Dark on My Qolsys IQ Panel 2 Plus?
In some cases, plastic film might be covering the Qolsys IQ Panel 2 Plus front camera lens. Photos will appear dark if it is left on. Learn how to fix dark photos on the IQ2+.
Added:

How Do I Integrate a Qolsys IQ Panel 2 Plus with Control4?
By completing the Control4 integration for your IQ Panel 2 Plus, you can use your C4 System as a secondary alarm keypad controller. Learn about the C4 integration for the IQ2+.
Added:

Can I Increase the Max Number of Zones On My Wireless Security System?
The maximum number of zones that an alarm system can support is hardcoded into the system's firmware. This limit cannot be increased. Learn about zone limits for alarm systems.
Added:

Does the Qolsys IQ Panel 2 Plus Have an Option for Night Stay?
Although you cannot set the IQ Panel 2 Plus to a Night Stay Arming Mode, there are Sensor Groups you can use to have motion sensors active while Armed Stay. Learn about the IQ2+.
Added:

What is the Difference Between S0 and S2 Z-Wave Protocols?
The S2 Security Protocol is supported by all Z-Wave Plus V2 700-Series devices, as well as certain Z-Wave Plus 500-Series devices. Learn the difference between S2 and S0.
Added:

Why Isn't My S2 Z-Wave Device Working with My Qolsys IQ Panel 2?
Qolsys made the IQ Panel 2 compatible with the S2 Security Protocol in Z-Wave FW Version 6.81.03. But you may also need to upgrade the system firmware. Learn about IQ2 Z-Wave.
Added:

How Do I Use the Alarm.com In-App Panic Feature?
The Alarm.com In-App Panic allows you to send an alert to the central station. Police, Fire, and Auxiliary Panics can be performed. Learn how to use the Alarm.com In-App Panic.
Added:

How Do I Enroll the PowerG PG9914 with a Qolsys IQ Panel 2 Plus?
To enroll the PG9914, put the IQ2+ in its auto-enrollment mode, open the PG9914, press and hold its enroll button until its LED is orange, and release. Learn to enroll the PG9914.
Added:

What is the "Remove All Devices" Option for the Qolsys IQ Panel 2 Plus?
If you choose the Remove All Devices option in the Qolsys IQ Panel 2 Plus Z-Wave Menu, then all programmed Z-Wave devices will be cleared from the panel. Learn about this option.
Added: