IQ Panel 5 AT&T LTE Frequently Asked Questions
How Do I Change the Installer Code on the IQ Panel 5 Panel?
Learn how to change the Installer Code on the IQ Panel 5. Go to Advanced Settings, touch User Management, and use the pencil icon next to Installer to edit.
How Do I Add a Garage Door Controller to the IQ Panel 5?
Add a Z-Wave garage door controller to the IQ Panel 5 by going to Settings, Advanced Settings, entering code 1111, then Devices, Z-Wave Devices, Add Device.
How Do I Add and Control Z-Wave Lights on the IQ Panel 5?
Learn how to add and control Z-Wave lights on the IQ Panel 5. Enroll dimmers and smart switches, then control them from the panel touchscreen or Alarm.com.
What Does Bypassing a Zone Do on the IQ Panel 5 System?
Bypassing a zone on the IQ Panel 5 removes a sensor from protection for one arming cycle. A bypassed zone will not trigger an alarm if tripped while armed.
How Do I Find and Watch Video Tutorials on the IQ Panel 5?
Watch video tutorials on the IQ Panel 5 by touching the Message Center icon in the upper right corner and selecting the Video Tutorials tab to browse videos.
How Do I Factory Reset the IQ Panel 5 to Default Settings?
Factory reset the IQ Panel 5 by swiping down, touching Settings, Advanced Settings, entering your Installer Code (1111), then navigating to Dealer Settings.
Where Do Disarm Photos Appear on the IQ Panel 5 Camera?
IQ Panel 5 disarm photos go to the Camera page ARM/DISARM section. Photos include the disarming user, date, and time. Alarm.com can forward them to your phone.
How Do I Run a Cellular LTE Test on the IQ Panel 5 System?
Run a cellular LTE test on the IQ Panel 5 by going to Settings, Advanced Settings, entering code 1111, then System Tests and Cellular Test. Select Start.
What Is the Quick Arm Feature on the IQ Panel 5 System?
Quick Arm on the IQ Panel 5 arms the system without a code. Secure Arming must be disabled by the installer for Quick Arm to function. It is off by default.
How Do I Check for a Software Update on the IQ Panel 5?
Check for software updates on the IQ Panel 5 by swiping down, selecting Settings, then Advanced Settings, entering code 1111, and choosing Upgrade Software.
Learn how to change the Installer Code on the IQ Panel 5. Go to Advanced Settings, touch User Management, and use the pencil icon next to Installer to edit.
Added:
How Do I Add a Garage Door Controller to the IQ Panel 5?
Add a Z-Wave garage door controller to the IQ Panel 5 by going to Settings, Advanced Settings, entering code 1111, then Devices, Z-Wave Devices, Add Device.
Added:
How Do I Add and Control Z-Wave Lights on the IQ Panel 5?
Learn how to add and control Z-Wave lights on the IQ Panel 5. Enroll dimmers and smart switches, then control them from the panel touchscreen or Alarm.com.
Added:
What Does Bypassing a Zone Do on the IQ Panel 5 System?
Bypassing a zone on the IQ Panel 5 removes a sensor from protection for one arming cycle. A bypassed zone will not trigger an alarm if tripped while armed.
Added:
How Do I Find and Watch Video Tutorials on the IQ Panel 5?
Watch video tutorials on the IQ Panel 5 by touching the Message Center icon in the upper right corner and selecting the Video Tutorials tab to browse videos.
Added:
How Do I Factory Reset the IQ Panel 5 to Default Settings?
Factory reset the IQ Panel 5 by swiping down, touching Settings, Advanced Settings, entering your Installer Code (1111), then navigating to Dealer Settings.
Added:
Where Do Disarm Photos Appear on the IQ Panel 5 Camera?
IQ Panel 5 disarm photos go to the Camera page ARM/DISARM section. Photos include the disarming user, date, and time. Alarm.com can forward them to your phone.
Added:
How Do I Run a Cellular LTE Test on the IQ Panel 5 System?
Run a cellular LTE test on the IQ Panel 5 by going to Settings, Advanced Settings, entering code 1111, then System Tests and Cellular Test. Select Start.
Added:
What Is the Quick Arm Feature on the IQ Panel 5 System?
Quick Arm on the IQ Panel 5 arms the system without a code. Secure Arming must be disabled by the installer for Quick Arm to function. It is off by default.
Added:
How Do I Check for a Software Update on the IQ Panel 5?
Check for software updates on the IQ Panel 5 by swiping down, selecting Settings, then Advanced Settings, entering code 1111, and choosing Upgrade Software.
Added: