IQ Panel 5 AT&T LTE Frequently Asked Questions
How Do I Hard Reboot the IQ Panel 5?
Learn how to hard reboot the IQ Panel 5. Press and hold the wake/sleep button on the side for 30 seconds, and use it only when absolutely necessary. Full steps.
What Does Z-Wave Diagnostics Show on the IQ Panel 5?
Learn what Z-Wave Diagnostics shows on the IQ Panel 5: a map of your Z-Wave network, each device's route, and a key chart for signal strength and repeaters.
How Do I Enable Ambient Noise Detection on the IQ Panel 5?
Enable the Panel Ambient Noise Detector on the IQ Panel 5 in Installer Settings. The panel mics alert on loud noise above a set dB threshold, great for rentals.
How Do I Enable the Panel Motion Detector on the IQ Panel 5?
Enable Panel Motion Detection on the IQ Panel 5 under Installer Settings. It uses the panel camera for activity monitoring, not as a security motion sensor.
How Do I Enable Glass Break Detection on the IQ Panel 5?
Enable Panel Glass Break Detection on the IQ Panel 5 in Installer Settings. The panels built-in microphones act as a glass break detector, no extra sensor.
How Do I Set Up the System Health Check on the IQ Panel 5?
Set up the System Health Check on the IQ Panel 5 in Installer Settings. Control whether it appears on Manage My System and if it becomes the home screen too.
How Do I Turn Off Auto Bypass on the IQ Panel 5?
Learn how to turn off Auto Bypass on the IQ Panel 5. Go to Installation, Security and Arming, and turn the setting off so open sensors are no longer bypassed.
How Do I Delete All of the Sensors on the IQ Panel 5 System?
Delete all sensors on the IQ Panel 5 under Installer Settings. Delete All Sensors erases every programmed security sensor and Bluetooth device all at once.
How Do I Turn Off the Severe Weather Siren Warning on the IQ Panel 5?
Learn how to turn off the Severe Weather Siren Warning on the IQ Panel 5. Go to Installation, Siren and Alarms, and turn the setting off to use the chime.
How Do I Turn On Indoor Temperature Reporting on the IQ Panel 5?
Learn how to turn on Indoor Temperature Reporting on the IQ Panel 5. Enable PowerG temperature reporting, then pick the sensor to show on the home screen.
Learn how to hard reboot the IQ Panel 5. Press and hold the wake/sleep button on the side for 30 seconds, and use it only when absolutely necessary. Full steps.
Added:
What Does Z-Wave Diagnostics Show on the IQ Panel 5?
Learn what Z-Wave Diagnostics shows on the IQ Panel 5: a map of your Z-Wave network, each device's route, and a key chart for signal strength and repeaters.
Added:
How Do I Enable Ambient Noise Detection on the IQ Panel 5?
Enable the Panel Ambient Noise Detector on the IQ Panel 5 in Installer Settings. The panel mics alert on loud noise above a set dB threshold, great for rentals.
Added:
How Do I Enable the Panel Motion Detector on the IQ Panel 5?
Enable Panel Motion Detection on the IQ Panel 5 under Installer Settings. It uses the panel camera for activity monitoring, not as a security motion sensor.
Added:
How Do I Enable Glass Break Detection on the IQ Panel 5?
Enable Panel Glass Break Detection on the IQ Panel 5 in Installer Settings. The panels built-in microphones act as a glass break detector, no extra sensor.
Added:
How Do I Set Up the System Health Check on the IQ Panel 5?
Set up the System Health Check on the IQ Panel 5 in Installer Settings. Control whether it appears on Manage My System and if it becomes the home screen too.
Added:
How Do I Turn Off Auto Bypass on the IQ Panel 5?
Learn how to turn off Auto Bypass on the IQ Panel 5. Go to Installation, Security and Arming, and turn the setting off so open sensors are no longer bypassed.
Added:
How Do I Delete All of the Sensors on the IQ Panel 5 System?
Delete all sensors on the IQ Panel 5 under Installer Settings. Delete All Sensors erases every programmed security sensor and Bluetooth device all at once.
Added:
How Do I Turn Off the Severe Weather Siren Warning on the IQ Panel 5?
Learn how to turn off the Severe Weather Siren Warning on the IQ Panel 5. Go to Installation, Siren and Alarms, and turn the setting off to use the chime.
Added:
How Do I Turn On Indoor Temperature Reporting on the IQ Panel 5?
Learn how to turn on Indoor Temperature Reporting on the IQ Panel 5. Enable PowerG temperature reporting, then pick the sensor to show on the home screen.
Added: