IQ Panel 5 AT&T LTE Frequently Asked Questions
How Do I Enable EN Grade 2 Compliance on the IQ Panel 5?
Enable EN Grade 2 on the IQ Panel 5 in Installer Settings. This EN 50131 compliance mode changes entry procedures, trouble handling, and more automatically.
How Do I Change the AC Delay Notification on the IQ Panel 5?
Change the AC Delay Notification on the IQ Panel 5 under Installer Settings. Choose 1 to 60 minutes before an AC power loss reports, with EN Grade 2 enabled.
How Do I Relaunch the Setup Wizard on the IQ Panel 5 System?
Learn how to relaunch the Setup Wizard on the IQ Panel 5. Go to Advanced Settings, enter the Installer Code, touch Setup Wizard, then touch Launch Wizard.
How Do I Run an Ambient Noise Test on the IQ Panel 5 System?
Learn how to run an Ambient Noise Test on the IQ Panel 5. Go to System Tests, touch Ambient Noise Test, and touch Start to see the noise level statistics.
How Do I Run a Panel Glass Break Test on the IQ Panel 5?
Learn how to run a Panel Glass Break Test on the IQ Panel 5. Go to System Tests, run the Clap Test, then use a glass break simulator to confirm detection.
What Does the Automation Feature Do on the IQ Panel 5 System?
Automation on the IQ Panel 5 manages local lighting rules, such as Night, Evening, Front Door, and Doorbell. See what it does and how it differs from Alarm.com.
How Do I Disable Arm Stay No Delay on the IQ Panel 5 System?
Learn how to disable Arm Stay No Delay on the IQ Panel 5. Go to Installation, Security and Arming, and turn off the toggle to add a countdown to Stay mode.
How Do I Delete All Z-Wave Devices on the IQ Panel 5 System?
Learn how to delete all Z-Wave devices on the IQ Panel 5. Go to Installation, Devices, Z-Wave Devices, then touch Remove All Devices and confirm with OK.
How Do I Set Up the IQ Panel 5 Out of the Box to Arm and Disarm?
Learn how to set up the IQ Panel 5 out of the box. Plug in the battery and power, run the Setup Wizard, then arm in Stay mode and disarm with your user code.
How Do I Turn Off WIFI Warning Messages on the IQ Panel 5?
Turn off WIFI warning messages on the IQ Panel 5 under Installer Settings. When enabled, the panel defaults to the Manage My System page whenever WIFI drops.
Enable EN Grade 2 on the IQ Panel 5 in Installer Settings. This EN 50131 compliance mode changes entry procedures, trouble handling, and more automatically.
Added:
How Do I Change the AC Delay Notification on the IQ Panel 5?
Change the AC Delay Notification on the IQ Panel 5 under Installer Settings. Choose 1 to 60 minutes before an AC power loss reports, with EN Grade 2 enabled.
Added:
How Do I Relaunch the Setup Wizard on the IQ Panel 5 System?
Learn how to relaunch the Setup Wizard on the IQ Panel 5. Go to Advanced Settings, enter the Installer Code, touch Setup Wizard, then touch Launch Wizard.
Added:
How Do I Run an Ambient Noise Test on the IQ Panel 5 System?
Learn how to run an Ambient Noise Test on the IQ Panel 5. Go to System Tests, touch Ambient Noise Test, and touch Start to see the noise level statistics.
Added:
How Do I Run a Panel Glass Break Test on the IQ Panel 5?
Learn how to run a Panel Glass Break Test on the IQ Panel 5. Go to System Tests, run the Clap Test, then use a glass break simulator to confirm detection.
Added:
What Does the Automation Feature Do on the IQ Panel 5 System?
Automation on the IQ Panel 5 manages local lighting rules, such as Night, Evening, Front Door, and Doorbell. See what it does and how it differs from Alarm.com.
Added:
How Do I Disable Arm Stay No Delay on the IQ Panel 5 System?
Learn how to disable Arm Stay No Delay on the IQ Panel 5. Go to Installation, Security and Arming, and turn off the toggle to add a countdown to Stay mode.
Added:
How Do I Delete All Z-Wave Devices on the IQ Panel 5 System?
Learn how to delete all Z-Wave devices on the IQ Panel 5. Go to Installation, Devices, Z-Wave Devices, then touch Remove All Devices and confirm with OK.
Added:
How Do I Set Up the IQ Panel 5 Out of the Box to Arm and Disarm?
Learn how to set up the IQ Panel 5 out of the box. Plug in the battery and power, run the Setup Wizard, then arm in Stay mode and disarm with your user code.
Added:
How Do I Turn Off WIFI Warning Messages on the IQ Panel 5?
Turn off WIFI warning messages on the IQ Panel 5 under Installer Settings. When enabled, the panel defaults to the Manage My System page whenever WIFI drops.
Added: