Qolsys IQ Panel 2 Plus 319.5 MHz AT&T-LTE 10-1 System Kit Frequently Asked Questions

Will a Qolsys IQ Panel 2 Work w/ a Phone Line?
There is no possible way to provide phone line monitoring for a Qolsys IQ Panel 2. The system does not have an input for a phone jack, and it does not have an integrated dialer. The system can only receive monitoring service through cellular connectivity. Learn more about the IQ Panel 2.
Added:

Will 2GIG Sensors Work On a Qolsys IQ Panel 2?
The standard wireless receiver for the Qolsys IQ Panel 2 is designed to work with 319.5 MHz sensors. Since the 2GIG Sensors operate at 345 MHz, they will not normally work with the IQ Panel 2. There are a few possible workarounds for this. Learn which sensors can be used with an IQ Panel 2.
Added:

Will Interlogix/GE Sensors Work on a Qolsys IQ Panel 2?
The Qolsys IQ Panel 2 is designed to work with wireless security sensors that operate at a frequency of 319.5 MHz. Since Interlogix and GE Sensors operate at this frequency, they can interface with the Qolsys IQ Panel 2. Learn more about which security sensors can be used with this alarm system.
Added:

How Do I Enroll a Z-Wave Lock to My Qolsys IQ Panel 2?
A Z-Wave lock is learned-in with an IQ Panel 2 in the same way as any other Z-Wave device. Simply put the system into its Z-Wave inclusion mode, and activate the lock's inclusion function. The panel should recognize the lock and learn it in. Learn how to enroll a Z-Wave lock with an IQ Panel 2.
Added:

How Do I Add a Qolsys IQ Panel 2 to My Local WIFI?
It is very easy to connect a Qolsys IQ Panel 2 to a WIFI network. Access the advanced settings menu using the system's Master Code. Then choose the WIFI option, and locate the network. Then provide the network password, and connect to the network. Learn how to set WIFI on a Qolsys IQ Panel 2.
Added:

What Kind of Wire Do I Need to Use to Install a Qolsys IQ Panel 2?
The Qolsys IQ Panel 2 comes with a 5-foot wire that ends with a barrel connector. This barrel connector makes it very easy to connect to the panel. The other end connects to the transformer. A longer 18-gauge 2-conductor wire can also be used if desired. Learn more about powering an IQ Panel 2.
Added:

Does the Qolsys IQ Panel 2 Support Partitions?
Software Update 2.3.0 made it possible for the Qolsys IQ Panel 2 to support partitions. The option is found within the Advanced Settings Menu. Learn about the Qolsys IQ Panel 2.
Added:

Which Sensors Work w/ Qolsys Systems?
Qolsys Alarm Systems are designed to interface with alarm sensors that operate at a frequency of 319.5 MHz. This includes any security sensor that is manufactured by Qolsys. The company produces both encrypted and non-encrypted sensors for their systems. Learn more about 319.5 MHz sensors.
Added:

How Do I Connect My Qolsys IQ Panel 2 to a Garage Door?
A Qolsys IQ Panel 2 can connect with a Z-Wave garage door controller. This will allow the panel to open and close a garage door, and the panel will show whether the garage door is opened or closed. This can also be done using the Alarm.com service. Learn more about Z-Wave garage door controllers.
Added:

Can I Add a Wired Siren to the Qolsys IQ Panel 2?
A wired siren can be added to a Qolsys IQ Panel 2 system. The device connects to the siren outputs on the back of the IQ Panel 2. The siren is powered using any 12VDC plug-in transformer. Once installed, it will function automatically. Learn more about using a wired siren with an IQ Panel 2.
Added: