Honeywell VISTA-21iPLTE Frequently Asked Questions

How Do I Change the Default Screen On an Alpha Keypad For a VISTA-21iPLTE?
You can set a custom word or phrase for the default screen on an Alphanumeric Keypad used with a VISTA-21iPLTE. Learn to set a custom phrase for an Alpha Keypad default screen.
Added:

How Do I Power Cycle My Wired Alarm System?
Performing a power cycle reset of your wired alarm system is very easy! All you have to do is follow these simple steps. Learn to power cycle your wired security system.
Added:

How Do I Reset My Wired Alarm System?
A "reset" for an alarm system can refer to a factory reset or a power cycle reset. Each type of reset serves a different purpose. Learn to reset your wired alarm system.
Added:

How Do I Set Up Scheduling On a VISTA-15P, VISTA-20P, or VISTA-21iPLTE?
The Honeywell VISTA P-Series Systems allow you to establish local schedules for the automatic operation of events. Learn how to build local schedules on a VISTA System.
Added:

How Do You Manually Control an Output On a VISTA-15P, VISTA-20P, or VISTA-21IPLTE Panel?
Manual control of an output is achieved by using the Code + [#] + [7xx] or Code + [#] + [8xx] command. These commands will turn an output ON or OFF respectively. Learn more here.
Added:

How Do I Change the Master Code for a VISTA-15P, 20P or 21iP Using the Honeywell Home Tuxedo?
By accessing Console Mode, you can change the Master Code for your VISTA. This is done in the same way as using an Alphanumeric Keypad. Learn to change your system's Master Code.
Added:

What are the Best Ways to Prevent False Alarms?
A single mistake can result in a false alarm and a costly fine. You can prevent false alarms by following a set of practices. Learn how to prevent false security system alarms.
Added:

How Do I Use the Chime By Zone Function for a Honeywell VISTA P-Series Panel?
Using the Chime By Zone function requires setting up a Zone List in *81 and then configuring the feature in *26. An Alpha Keypad is needed. Learn to use Chime By Zone on a VISTA.
Added:

What is the Difference Between Honeywell and ADEMCO?
Honeywell and ADEMCO both largely refer to the same equipment. ADEMCO was the original name for Honeywell, which later became Resideo. Learn about Honeywell and ADEMCO.
Added:

How Do I Turn Off Arm-Confirm for a Honeywell VISTA System?
By turning off Arm-Confirm, your system's siren will not produce a loud tone whenever you Arm Away using a keypad or key fob. Learn how to turn off Arm-Confirm for a VISTA System.
Added: