Wireless Alarm Control Panels Frequently Asked Questions

2GIG GC3 vs Honeywell L5210, L7000 Security System
The 2GIG GC3, Honeywell L5210 and L7000 panels have many similarities, as well as differences. Depending on the user's needs, all panels are great options.
Added:

What is a Transmitter Sniffer Test on a Vista Panel?
The transmitter sniffer test is used to verify that programming for wireless zones is correct, and that the devices are transmitting. Read on to learn more!
Added:

How Do I Program a 5800RP to a Lyric Controller or a Lynx Touch?
A 5800RP is programmed to a Honeywell security system by assigning it to a zone. This will provide the panel with notices regarding the status of the 5800RP.
Added:

Is the 2GIG DW10 a Z-Wave Device?
The 2GIG DW10 door and window sensor is not a z-wave device. The sensor uses RF communication in order to interact with the user's 2GIG security panel.
Added:

How Do I Program a SiXSMOKE to a Lyric Security System?
The Honeywell SiXSMOKE can be auto-enrolled with the Honeywell Lyric Alarm System. Learn how to program a Honeywell SiXSMOKE to your Lyric System for smoke and heat detection.
Added:

How do I set up GeoFence arming reminders on an iOS device in TC2.0?
GeoFence arming reminders alert when an associated device leaves the designated area, and the system is not armed. Learn to create a GeoFence arming reminder.
Added:

How Do I Perform a Transmitter Sniffer Test on a Vista Panel?
Enter Installer Code + [#] + [3] to begin the transmitter sniffer test. The system must be ready, with no faults or bypasses, in order to enter this mode.
Added:

What is the "Abort Window Dialer Delay" on a 2GIG Security System?
The Abort Window Dial Delay can be applied to burglary zones, and gives a user the chance to disarm prior to an alarm report being sent. Read on to learn more.
Added:

Why Is My Lyric Gateway Always in Not-Ready to Arm Mode?
The Honeywell Lyric Gateway is in "not ready to arm" mode if a zone is faulted, or if a zone has a tamper switch activated. Learn how to resolve these issues.
Added:

What Software Lets Me Make Changes on My VISTA 20P?
Users can make changes on a VISTA using Total Connect 2.0, or by hand programming it. A monitored alarm company who's a Honeywell dealer uses Compass. Read on.
Added: