Wireless Alarm Control Panels Frequently Asked Questions

How Do I Program a Window Sensor to a Honeywell L5100?
A window sensor can be programmed into an L5100 through the zone programming menu of the panel. You will need the panel's installer code to access this menu.
Added:

How Do I Program a 5834-4 Key Fob to an L3000?
A 5834-4 key fob can be programmed into an L3000 system through the programming menu of the panel. You will need the installer code to access this menu.
Added:

How Do I Enter Walk Test Mode on a Vista Panel?
You can enter walk test mode on the Vista-15P, 20P, 21iP panels by keying in Installer Code + [5] + [0]. The panel must be "Ready" to access test mode.
Added:

How Do I Add a Honeywell 5811 to a Lynx Touch?
A 5811 wireless sensor can be programmed to a Honeywell LYNX Touch alarm system through system programming. Make sure to test the sensor after programming.
Added:

Can I Pre-Program a Honeywell L5200?
The L5200 cannot be sent pre-programmed by Alarm Grid. However, the programming process is relatively easy for an end-user, and our team is happy to help.
Added:

How Do You Connect a 2GIG TS1 Keypad with a 2GIG GC3 Panel?
The 2GIG TS1 wireless keypad is unable to connect with a 2GIG GC3 security panel. The 2GIG TS1 keypad is designed to be used with the 2GIG GC2 security panel.
Added:

How Do I Identify a Trouble Sensor on My Honeywell L3000?
A user can check which sensor is in trouble on the Honeywell L3000’s LCD display. Any zone that is in a troubled condition will be displayed on the screen.
Added:

How Do I Program the 2GIG SMKT3-345 to the Lyric Gateway 2GIG GC3?
You can add a 2GIG SMKT3-345 combination smoke, heat and freeze detector to your GC3 security system, by accessing the system programming menu for your panel.
Added:

How Do You Add a 2GIG GB1 to the 2GIG GC3?
A 2GIG GB1 glass break can be added to a GC3 security panel through system programming. You can also change the settings for the glass break from this menu.
Added:

How Do I Program a Wireless Sensor on my Honeywell LYNX Touch?
Wireless sensors can be programmed to a LYNX Touch system through the panel's zone programming menu. You will need the installer code to access the menu.
Added: