Wireless Alarm Control Panels Frequently Asked Questions

How Do I Program an IQ Fob to a Qolsys IQ Panel 2?
An IQ FOB keyfob can be programmed to a Qolsys IQ Panel 2 by having it auto-learned with the panel. After doing this, it will function with the IQ Panel 2.
Added:

Why Won't My Honeywell L5200 Disarm?
The most common reason for an L5200 to not disarm is because the wrong user code is being entered. Check and make sure the correct code is being entered.
Added:

How Do I Replace a L5100's GSMVLP5-4G Cellular Module?
In order to replace a GSMVLP5-4G in an L5100, you will need to take out the old cellular communicator and then install and register the new communicator.
Added:

How Do I Make My Honeywell L5200 Work w/ AlarmNet 360?
The Honeywell L5200 will need a communicator installed to be able to work with AlarmNet 360. The learn how an alarm company can register the panel, read on.
Added:

Will My Monitoring Company Change My Installer Code?
It is possible an alarm company will change the installer code for the security system. Some companies do this as a way of limiting what the user can do.
Added:

How Do I Get into Programming on My Honeywell LYNX Touch?
The programming menu on a Honeywell LYNX Touch can be found within the panel's security menu. You will need to know your installer code to access the menu.
Added:

What Kind of Battery Does the Honeywell 5800RP Use?
The 5800RP uses a 7.2 VDC Ni-MH rechargeable battery, capable of providing up to 6 hours of standby operation in the event of AC loss. Read on to learn more.
Added:

What Frequency Do the 5800 Sensors Operate at?
Honeywell's 5800 series wireless devices operate at 345 MHz. This frequency was assigned to them by the FCC, and should operate free of interference in the US.
Added:

2GIG GC3 vs Honeywell L5210, L7000 Security System
The 2GIG GC3, Honeywell L5210 and L7000 panels have many similarities, as well as differences. Depending on the user's needs, all panels are great options.
Added:

What is a Transmitter Sniffer Test on a Vista Panel?
The transmitter sniffer test is used to verify that programming for wireless zones is correct, and that the devices are transmitting. Read on to learn more!
Added: