Frequently Asked Questions
2GIG SMKT3-345 vs Honeywell 5808W3
The 2GIG SMKT3-345 and the Honeywell 5808W3 both operate at the 345 MHz wireless frequency. Both devices provide smoke and heat detection. Both the SMKT3-345 and the 5808W3 offer freeze detection capabilities as well. Learn more information about these two wireless smoke and heat detectors.
How Long Does a Siren Sound on an Interlogix Simon XTi or XTi-5?
The siren on a Simon XTi or XTi-5 System will continue to sound until the siren timeout period expires. This can be set from anywhere between 2 minutes and 254 minutes. It can also be turned off to have the siren sound indefinitely. Learn how to adjust the Simon XTi and XTi-5 siren timeout.
Does the Interlogix Simon XT Support Partitions?
It is not possible to use multiple partitions with the Interlogix Simon XT. The panel can only provide support for one single partition that represents the entire system. There is also no way to set different access for different user codes. Learn more about the Interlogix Simon XT System.
Do Motion Detectors Work w/ an Interlogix Simon XTi or XTi-5?
If a motion detector operates at a wireless frequency of 319.5 MHz, then it can be used with the Interlogix Simon XTi and XTi-5 Alarm Systems. Most motion sensors are assigned a group type of either 17 or 20. Learn more about using motion sensors with an Interlogix Simon XTi or XTi-5.
Can I Connect to the Interlogix Simon XTi or XTi-5 w/ an iPad?
An Interlogix Simon XTi or XTi-5 System can be controlled by an iPad through the Alarm.com Mobile App. This app can be downloaded for free from the Apple App Store. The system will need active cellular service to sync with Alarm.com. Learn how to use an iPad with a Simon XTi or XTi-5.
Will Interlogix/GE Sensors Work on an Interlogix Simon XTi or XTi-5?
Interlogix/GE Sensors send wireless signals at a frequency of 319.5 MHz. They will work with the Interlogix Simon XTi and XTi-5 Systems since they accept incoming wireless signals at this frequency. Learn more about which wireless sensors can be used with the Simon XTi and XTi-5 Systems.
What Kind of Wire Do I Need to Use to Install a Qolsys IQ Panel 2?
The Qolsys IQ Panel 2 comes with a 5-foot wire that ends with a barrel connector. This barrel connector makes it very easy to connect to the panel. The other end connects to the transformer. A longer 18-gauge 2-conductor wire can also be used if desired. Learn more about powering an IQ Panel 2.
How Do I Add Additional User Codes to an Interlogix Simon XTi or XTi-5?
The option for adding new user codes to an Interlogix Simon XTi or XTi-5 is found through system programming. The system's current Master Code is required to access this menu. Up to eight standard user codes can be added to the system. Learn more about user codes on the XTi and XTi-5.
Will Honeywell 5800 Sensors Work on an Interlogix Simon XTi or XTi-5?
The Interlogix Simon XTi and XTi-5 Alarm Systems both feature a wireless receiver that accepts incoming signals at a frequency of 319.5 MHz. The Honeywell 5800 Sensors are not compatible since they operate at the 345 MHz frequency. Learn more about the sensors used with the Simon XTi and XTi-5.
Which Deadbolt Lock Is Compatible w/ an Interlogix Simon XTi or XTi-5?
The Simon XTi and XTi-5 Systems are capable of supporting almost any Z-Wave lock once a Z-Wave Controller has been added. The lock is paired with the system and included into the Z-Wave network. It can then be controlled using the Alarm.com service. Learn more about using Z-Wave door locks.
The 2GIG SMKT3-345 and the Honeywell 5808W3 both operate at the 345 MHz wireless frequency. Both devices provide smoke and heat detection. Both the SMKT3-345 and the 5808W3 offer freeze detection capabilities as well. Learn more information about these two wireless smoke and heat detectors.
Added:
How Long Does a Siren Sound on an Interlogix Simon XTi or XTi-5?
The siren on a Simon XTi or XTi-5 System will continue to sound until the siren timeout period expires. This can be set from anywhere between 2 minutes and 254 minutes. It can also be turned off to have the siren sound indefinitely. Learn how to adjust the Simon XTi and XTi-5 siren timeout.
Added:
Does the Interlogix Simon XT Support Partitions?
It is not possible to use multiple partitions with the Interlogix Simon XT. The panel can only provide support for one single partition that represents the entire system. There is also no way to set different access for different user codes. Learn more about the Interlogix Simon XT System.
Added:
Do Motion Detectors Work w/ an Interlogix Simon XTi or XTi-5?
If a motion detector operates at a wireless frequency of 319.5 MHz, then it can be used with the Interlogix Simon XTi and XTi-5 Alarm Systems. Most motion sensors are assigned a group type of either 17 or 20. Learn more about using motion sensors with an Interlogix Simon XTi or XTi-5.
Added:
Can I Connect to the Interlogix Simon XTi or XTi-5 w/ an iPad?
An Interlogix Simon XTi or XTi-5 System can be controlled by an iPad through the Alarm.com Mobile App. This app can be downloaded for free from the Apple App Store. The system will need active cellular service to sync with Alarm.com. Learn how to use an iPad with a Simon XTi or XTi-5.
Added:
Will Interlogix/GE Sensors Work on an Interlogix Simon XTi or XTi-5?
Interlogix/GE Sensors send wireless signals at a frequency of 319.5 MHz. They will work with the Interlogix Simon XTi and XTi-5 Systems since they accept incoming wireless signals at this frequency. Learn more about which wireless sensors can be used with the Simon XTi and XTi-5 Systems.
Added:
What Kind of Wire Do I Need to Use to Install a Qolsys IQ Panel 2?
The Qolsys IQ Panel 2 comes with a 5-foot wire that ends with a barrel connector. This barrel connector makes it very easy to connect to the panel. The other end connects to the transformer. A longer 18-gauge 2-conductor wire can also be used if desired. Learn more about powering an IQ Panel 2.
Added:
How Do I Add Additional User Codes to an Interlogix Simon XTi or XTi-5?
The option for adding new user codes to an Interlogix Simon XTi or XTi-5 is found through system programming. The system's current Master Code is required to access this menu. Up to eight standard user codes can be added to the system. Learn more about user codes on the XTi and XTi-5.
Added:
Will Honeywell 5800 Sensors Work on an Interlogix Simon XTi or XTi-5?
The Interlogix Simon XTi and XTi-5 Alarm Systems both feature a wireless receiver that accepts incoming signals at a frequency of 319.5 MHz. The Honeywell 5800 Sensors are not compatible since they operate at the 345 MHz frequency. Learn more about the sensors used with the Simon XTi and XTi-5.
Added:
Which Deadbolt Lock Is Compatible w/ an Interlogix Simon XTi or XTi-5?
The Simon XTi and XTi-5 Systems are capable of supporting almost any Z-Wave lock once a Z-Wave Controller has been added. The lock is paired with the system and included into the Z-Wave network. It can then be controlled using the Alarm.com service. Learn more about using Z-Wave door locks.
Added: