Frequently Asked Questions
How Do I Reset an Interlogix Simon XT to Factory Defaults?
To reset a Simon XT, you must power the panel completely down by removing the backup battery and unplugging the transformer. Then, hold down the four top buttons while powering the panel back on. This will restore factory default settings for the system. Learn more about resetting a Simon XT.
How Do I Activate the Chime on an Interlogix Simon XT?
The chime for an Interlogix Simon XT can activate whenever a sensor on the system is triggered. The system will produce a chime sound and display the affected zone when this occurs. This chime option is found under the main menu. Learn more about the chime function on an Interlogix Simon XT.
Which Locks Work w/ an Interlogix Simon XT?
The Interlogix Simon XT will support any Z-Wave lock. The system will need to have an added Z-Wave controller to support the lock. Once the lock has been set up, the user can enter a valid system code into the lock's keypad to unlock it. Learn more about using locks with an Interlogix Simon XT.
Is the Interlogix Simon XT Compatible w/ Total Connect?
Total Connect is designed to function with Honeywell Systems only. The Interlogix Simon XT is not manufactured by Honeywell, and it is not compatible with the Total Connect service. However, it can use the Alarm.com service instead. Learn more about the Interlogix Simon XT and Alarm.com.
How Many Hardwired Zones Are On an Interlogix Simon XT?
The Interlogix Simon XT will support up to 40 different zones. Two of these zones can be hardwired or wireless, while the other 38 can only be wireless. Hardwired sensors can also use a wireless transmitter to communicate with the Simon XT. Learn more about using hardwired zones with the Simon XT.
How Many Wireless Zones Are On an Interlogix Simon XT?
The Interlogix Simon XT provides support for up to 40 different security and life-safety zones. Two of these zones can be either hardwired or wireless, while the other 38 must be wireless. The system works with wireless sensors that operate at a frequency of 319.5 MHz. Learn more about the Simon XT.
Is there a Tilt Sensor Compatible w/ the Interlogix Simon XT?
Interlogix manufactures the TX-E401 Tilt Sensor that is compatible with their Simon XT System. This tilt sensor operates at a wireless frequency of 319.5 MHz. Other sensors that also operate at this same frequency are similarly compatible with the system. Learn more about the TX-E401 Sensor.
Can I Make an Interlogix Simon XT a Secondary Z-Wave Controller?
The Simon XT does not include a built-in Z-Wave controller. To use Z-Wave devices with the system, a user will need to install some type of Z-Wave controller. Even then, Z-Wave devices cannot be operated directly from the Simon XT Panel itself. Learn more about Z-Wave home automation.
How Do I Add a Wireless Zone to an Interlogix Simon XT?
Wireless zones for an Interlogix Simon XT are configured through the System Programming Menu. With the system in its learn mode, activate the sensor tamper to learn it in. Then configure the settings for that zone. Learn how to enroll a wireless sensor with an Interlogix Simon XT System.
Will Alarm.com Work w/ an Interlogix Simon XT?
Alarm.com is the interactive service used with a Simon XT System. The service is used to arm and disarm the system, check the status of sensors and control Z-Wave devices. A Simon XT must have active cellular service before it can work with Alarm.com. Learn more about the Simon XT and Alarm.com.
To reset a Simon XT, you must power the panel completely down by removing the backup battery and unplugging the transformer. Then, hold down the four top buttons while powering the panel back on. This will restore factory default settings for the system. Learn more about resetting a Simon XT.
Added:
How Do I Activate the Chime on an Interlogix Simon XT?
The chime for an Interlogix Simon XT can activate whenever a sensor on the system is triggered. The system will produce a chime sound and display the affected zone when this occurs. This chime option is found under the main menu. Learn more about the chime function on an Interlogix Simon XT.
Added:
Which Locks Work w/ an Interlogix Simon XT?
The Interlogix Simon XT will support any Z-Wave lock. The system will need to have an added Z-Wave controller to support the lock. Once the lock has been set up, the user can enter a valid system code into the lock's keypad to unlock it. Learn more about using locks with an Interlogix Simon XT.
Added:
Is the Interlogix Simon XT Compatible w/ Total Connect?
Total Connect is designed to function with Honeywell Systems only. The Interlogix Simon XT is not manufactured by Honeywell, and it is not compatible with the Total Connect service. However, it can use the Alarm.com service instead. Learn more about the Interlogix Simon XT and Alarm.com.
Added:
How Many Hardwired Zones Are On an Interlogix Simon XT?
The Interlogix Simon XT will support up to 40 different zones. Two of these zones can be hardwired or wireless, while the other 38 can only be wireless. Hardwired sensors can also use a wireless transmitter to communicate with the Simon XT. Learn more about using hardwired zones with the Simon XT.
Added:
How Many Wireless Zones Are On an Interlogix Simon XT?
The Interlogix Simon XT provides support for up to 40 different security and life-safety zones. Two of these zones can be either hardwired or wireless, while the other 38 must be wireless. The system works with wireless sensors that operate at a frequency of 319.5 MHz. Learn more about the Simon XT.
Added:
Is there a Tilt Sensor Compatible w/ the Interlogix Simon XT?
Interlogix manufactures the TX-E401 Tilt Sensor that is compatible with their Simon XT System. This tilt sensor operates at a wireless frequency of 319.5 MHz. Other sensors that also operate at this same frequency are similarly compatible with the system. Learn more about the TX-E401 Sensor.
Added:
Can I Make an Interlogix Simon XT a Secondary Z-Wave Controller?
The Simon XT does not include a built-in Z-Wave controller. To use Z-Wave devices with the system, a user will need to install some type of Z-Wave controller. Even then, Z-Wave devices cannot be operated directly from the Simon XT Panel itself. Learn more about Z-Wave home automation.
Added:
How Do I Add a Wireless Zone to an Interlogix Simon XT?
Wireless zones for an Interlogix Simon XT are configured through the System Programming Menu. With the system in its learn mode, activate the sensor tamper to learn it in. Then configure the settings for that zone. Learn how to enroll a wireless sensor with an Interlogix Simon XT System.
Added:
Will Alarm.com Work w/ an Interlogix Simon XT?
Alarm.com is the interactive service used with a Simon XT System. The service is used to arm and disarm the system, check the status of sensors and control Z-Wave devices. A Simon XT must have active cellular service before it can work with Alarm.com. Learn more about the Simon XT and Alarm.com.
Added: