Frequently Asked Questions
What's the Difference Between ADT Key Fobs & Honeywell 5834-4
An ADT Key Fob is basically the same device as a Honeywell 5834-4. It is ADT's rebranded version of the same key fob. Many users bring these fobs to new alarm companies and use them like a 5834-4. There's no need to "take over" one, since they work with multiple panels. Learn more about key fobs.
How Do I Replace an Existing Honeywell 5816 On My VISTA Security System?
Replacing an old Honeywell 5816 door and window contact on a VISTA Panel is a very easy process. Simply delete the serial number of the old sensor from the panel. Then learn in the new one. Finally, uninstall the old sensor and install the new one. Learn more about replacing the Honeywell 5816.
How Do I Mount the ADC-V721W?
To mount the ADC-V721W, hold the mounting plate in the location where the camera will go. Then mark the location of the two holes to drill. Next, drill the two holes, along with a center hole for the cable. Finally, screw in the mounting plate, and attach the camera. Learn more about the ADC-V721W.
What Does an Alarm Do?
An alarm tells the system to send out a distress signal to a central monitoring station and/or the end user. This allows for emergency help to be requested as quickly as possible. The type of alarm that occurs depends on the Response Type for the zone. Learn more about the function of alarms.
Which Systems Can Alarm Grid Take Over?
Alarm Grid will support any alarm system that we can take over. To take over a system, the user may need to know the panel's Installer Code and/or Master Code. In some situations, the user will need to replace the system's communicator. Learn more about what systems we can take over.
Honeywell 5800COMBO vs Honeywell 5809
The 5800COMBO and the 5809 are both wireless fire sensors from Honeywell. The 5809 is for heat detection only, while the 5800COMBO is used for heat, smoke and carbon monoxide detection. Both sensors will interface with the same alarm systems. Learn more about these life-safety sensors.
How Do I Put the 2GIG GC2 Into Learn Mode?
Learn mode for the 2GIG GC2 is accessed through the system configurations menu. This mode is used to auto-enroll wireless sensors with the GC2 panel. By activating a sensor while the panel is in this mode, it can be learned-in automatically. Discover more about learn mode for a 2GIG GC2.
How Do I Use the Microphone on the IPCAM-WO?
A microphone is not included on the IPCAM-WO Total Connect Camera. There is also no way to add a microphone to the device. In other words, the device has no audio recording capabilities. But there are some other Honeywell Cameras that have audio capabilities. Learn more about TC Cameras.
What Is the Tamper On My Alarm System For?
The tamper switch is a very important feature on an alarm system. This feature tells the system to produce an instant alarm if someone tries to physically break into the panel while the system is armed. This prevents an intruder from powering down the panel. Learn more about tamper switches.
How Do I Wire a POTS Line to My Security System?
To wire a POTS line to a security system, the incoming phone line will connect to an RJ jack. The RJ jack is then connected with the alarm panel and the on-site landline phones. Check the terminals when wiring. The panel must support POTS service to do this. Learn more about wiring a POTS line.
An ADT Key Fob is basically the same device as a Honeywell 5834-4. It is ADT's rebranded version of the same key fob. Many users bring these fobs to new alarm companies and use them like a 5834-4. There's no need to "take over" one, since they work with multiple panels. Learn more about key fobs.
Added:
How Do I Replace an Existing Honeywell 5816 On My VISTA Security System?
Replacing an old Honeywell 5816 door and window contact on a VISTA Panel is a very easy process. Simply delete the serial number of the old sensor from the panel. Then learn in the new one. Finally, uninstall the old sensor and install the new one. Learn more about replacing the Honeywell 5816.
Added:
How Do I Mount the ADC-V721W?
To mount the ADC-V721W, hold the mounting plate in the location where the camera will go. Then mark the location of the two holes to drill. Next, drill the two holes, along with a center hole for the cable. Finally, screw in the mounting plate, and attach the camera. Learn more about the ADC-V721W.
Added:
What Does an Alarm Do?
An alarm tells the system to send out a distress signal to a central monitoring station and/or the end user. This allows for emergency help to be requested as quickly as possible. The type of alarm that occurs depends on the Response Type for the zone. Learn more about the function of alarms.
Added:
Which Systems Can Alarm Grid Take Over?
Alarm Grid will support any alarm system that we can take over. To take over a system, the user may need to know the panel's Installer Code and/or Master Code. In some situations, the user will need to replace the system's communicator. Learn more about what systems we can take over.
Added:
Honeywell 5800COMBO vs Honeywell 5809
The 5800COMBO and the 5809 are both wireless fire sensors from Honeywell. The 5809 is for heat detection only, while the 5800COMBO is used for heat, smoke and carbon monoxide detection. Both sensors will interface with the same alarm systems. Learn more about these life-safety sensors.
Added:
How Do I Put the 2GIG GC2 Into Learn Mode?
Learn mode for the 2GIG GC2 is accessed through the system configurations menu. This mode is used to auto-enroll wireless sensors with the GC2 panel. By activating a sensor while the panel is in this mode, it can be learned-in automatically. Discover more about learn mode for a 2GIG GC2.
Added:
How Do I Use the Microphone on the IPCAM-WO?
A microphone is not included on the IPCAM-WO Total Connect Camera. There is also no way to add a microphone to the device. In other words, the device has no audio recording capabilities. But there are some other Honeywell Cameras that have audio capabilities. Learn more about TC Cameras.
Added:
What Is the Tamper On My Alarm System For?
The tamper switch is a very important feature on an alarm system. This feature tells the system to produce an instant alarm if someone tries to physically break into the panel while the system is armed. This prevents an intruder from powering down the panel. Learn more about tamper switches.
Added:
How Do I Wire a POTS Line to My Security System?
To wire a POTS line to a security system, the incoming phone line will connect to an RJ jack. The RJ jack is then connected with the alarm panel and the on-site landline phones. Check the terminals when wiring. The panel must support POTS service to do this. Learn more about wiring a POTS line.
Added: