Frequently Asked Questions
How Do I Test a 2GIG GB1?
In order to test a 2GIG GB1 Glass Break Detector, you will need to use a glass break simulator, such as the Honeywell FG701. This will simulate the sound of breaking glass and cause the 2GIG GB1 to activate. If you receive central monitoring, have your system placed into test mode before doing this.
How Do I Setup a Lyric Thermostat in My Total Connect Account?
To connect a Lyric Round Thermostat with Total Connect, you will first get the thermostat online and connect it with the Lyric App. You will then integrate your Lyric App account information into Total connect. The thermostat can then be synced with the Lyric Controller. Read on to learn more.
How Do I Test the 5800COMBO?
When testing the Honeywell 5800COMBO, you will want to start by first contacting your alarm monitoring company and placing your system on test mode. Then, you can individually test the smoke/heat detection and the carbon monoxide detection for the device. Learn more about testing the 5800COMBO.
Where Should I Install a Glass Break Sensor?
A glass break detector should be placed as close to a window or glass case as possible with no objects blocking its path. This will help to ensure that the device will activate in the event that the window or case is shattered. Learn more about glass break sensors and where to place them.
How Do I Program a Honeywell Vista-20P Alarm System?
Programming a Honeywell Vista-20P starts with accessing programming mode by entering in the installer code, followed by 800. Next, you will press the * key plus a field number, followed by an entry. Once you are finished, you can exit programming by pressing *99. Keep reading to learn more.
How Do I Save Recordings from the IPCAM-WO?
You can access any recordings that were made by an IPCAM-WO IP Camera from the Events log on Total Connect. Once you have located the video that you want to save, click the download button for that video. Continue reading to learn more about saving video recordings from Total Connect.
Do I Need Monitoring if I Have Total Connect 2.0 or Alarm.com?
In order to use Total Connect 2.0 or Alarm.com, you will need to have a security panel that is actively monitored by an alarm monitoring company. Without monitoring service, you panel will not be able to connect with either of these services. Learn more about Total Connect 2.0 and Alarm.com.
How Do I Replace a Keyfob on a 2GIG Go!Control?
Replacing a keyfob on a 2GIG GC2 requires you to access system programming and then change the serial number of the old keyfob to the new one. You will need to know the system installer code to do this. Continue reading to learn the entire process for replacing keyfob on a 2GIG GC2 system.
How Do I Trip a 2GIG GB1 Glass Break Detector?
The 2GIG GB1 Glass Break Detector listens for both the "thud" of an object striking glass and the shattering sound of breaking glass. Hearing these two sounds together will cause the device to activate. A glass break simulator can imitate this sound and trip the sensor. Read on to learn more.
Is the Honeywell Lyric Z-Wave Compatible?
The Honeywell Lyric comes included with Z-Wave function. This allows the panel to sync with Z-Wave devices. These Z-Wave devices can be integrated into a user's home automation setup, and they can be controlled remotely using the Total Connect app. Learn more about Z-Wave on the Honeywell Lyric.
In order to test a 2GIG GB1 Glass Break Detector, you will need to use a glass break simulator, such as the Honeywell FG701. This will simulate the sound of breaking glass and cause the 2GIG GB1 to activate. If you receive central monitoring, have your system placed into test mode before doing this.
Added:
How Do I Setup a Lyric Thermostat in My Total Connect Account?
To connect a Lyric Round Thermostat with Total Connect, you will first get the thermostat online and connect it with the Lyric App. You will then integrate your Lyric App account information into Total connect. The thermostat can then be synced with the Lyric Controller. Read on to learn more.
Added:
How Do I Test the 5800COMBO?
When testing the Honeywell 5800COMBO, you will want to start by first contacting your alarm monitoring company and placing your system on test mode. Then, you can individually test the smoke/heat detection and the carbon monoxide detection for the device. Learn more about testing the 5800COMBO.
Added:
Where Should I Install a Glass Break Sensor?
A glass break detector should be placed as close to a window or glass case as possible with no objects blocking its path. This will help to ensure that the device will activate in the event that the window or case is shattered. Learn more about glass break sensors and where to place them.
Added:
How Do I Program a Honeywell Vista-20P Alarm System?
Programming a Honeywell Vista-20P starts with accessing programming mode by entering in the installer code, followed by 800. Next, you will press the * key plus a field number, followed by an entry. Once you are finished, you can exit programming by pressing *99. Keep reading to learn more.
Added:
How Do I Save Recordings from the IPCAM-WO?
You can access any recordings that were made by an IPCAM-WO IP Camera from the Events log on Total Connect. Once you have located the video that you want to save, click the download button for that video. Continue reading to learn more about saving video recordings from Total Connect.
Added:
Do I Need Monitoring if I Have Total Connect 2.0 or Alarm.com?
In order to use Total Connect 2.0 or Alarm.com, you will need to have a security panel that is actively monitored by an alarm monitoring company. Without monitoring service, you panel will not be able to connect with either of these services. Learn more about Total Connect 2.0 and Alarm.com.
Added:
How Do I Replace a Keyfob on a 2GIG Go!Control?
Replacing a keyfob on a 2GIG GC2 requires you to access system programming and then change the serial number of the old keyfob to the new one. You will need to know the system installer code to do this. Continue reading to learn the entire process for replacing keyfob on a 2GIG GC2 system.
Added:
How Do I Trip a 2GIG GB1 Glass Break Detector?
The 2GIG GB1 Glass Break Detector listens for both the "thud" of an object striking glass and the shattering sound of breaking glass. Hearing these two sounds together will cause the device to activate. A glass break simulator can imitate this sound and trip the sensor. Read on to learn more.
Added:
Is the Honeywell Lyric Z-Wave Compatible?
The Honeywell Lyric comes included with Z-Wave function. This allows the panel to sync with Z-Wave devices. These Z-Wave devices can be integrated into a user's home automation setup, and they can be controlled remotely using the Total Connect app. Learn more about Z-Wave on the Honeywell Lyric.
Added: