2GIG GC2 Frequently Asked Questions

Why Does My 2GIG System Beep When I Arm Away?
By beeping after you Arm Away, your 2GIG System is letting you know that you need to exit the premises before the Exit Delay Countdown expires. Learn about Arming Away.
Added:

How Does RF Supervision Loss Work On a 2GIG System?
All 2GIG Panels must receive RF check-in signals every 140 minutes, or else RF supervision loss occurs. This applies to a GC2, GC2e, GC3, and GC3e. Learn about RF supervision loss.
Added:

How Do I Change the Installer Code on a 2GIG Go!Control GC2?
It is always recommended that you keep the 2GIG GC2 Installer Code at 1561. But you can change this code if desired. Learn how to change the 2GIG GC2 Installer Code.
Added:

Can I Use 2GIG Encrypted Sensors With a 2GIG GC2?
The 2GIG Encrypted Sensors are for the GC2e and GC3e only. They are not backwards compatible with the older Go!Control GC2 and GC3 Systems. Learn about 2GIG Encrypted Sensors.
Added:

What Devices are Used With a 2GIG XCVR2-345 Transceiver on a Go!Control GC2?
The 2GIG XCVR2-345 supports 2-way communication devices. These include the Go!Bridge IP Communicator, the TS1 Touchscreen Keypad, and the IMAGE1 Sensor. Learn about the XCVR2-345.
Added:

Why Won't My GC2 Communicate Over IP?
You need a 2GIG Go!Bridge IP Communicator if you want a GC2 to communicate across IP. The GC2 will need to have a 2GIG XCVR2-345 Transceiver installed. Learn about the 2GIG GC2.
Added:

Can I Self-Monitor an Alarm.com Security System?
Central station service is not required for an Alarm.com Security System. You can get a self-monitoring plan and gain access to ADC. Learn about self-monitoring and Alarm.com.
Added:

How Do I Connect My 2GIG System to Wireless Internet?
The 2GIG GC3 has a built-in WIFI card for internet connectivity. The 2GIG GC2 needs a Go!Bridge module and a 2GIG XCVR2-345. Learn how to get your 2GIG System connected to WIFI.
Added:

How Do I Know If My 2GIG Wireless Alarm System's Battery Has Died?
A low-battery trouble will appear when your 2GIG Panel has a low battery. If you can't clear the trouble after 24-hours, the battery is probably dead. Learn about 2GIG Batteries.
Added:

How Do I Disable Quick Arming On a 2GIG GC2 System?
By Disabling the Quick Arming feature on a GC2 System, you will need to provide a valid code whenever your Arm Away or Arm Stay. Learn about Quick Arming on the 2GIG GC2.
Added: