Honeywell 5834-4 Frequently Asked Questions

What's the Difference Between ADT Key Fobs & Honeywell 5834-4
An ADT Key Fob is basically the same device as a Honeywell 5834-4. It is ADT's rebranded version of the same key fob. Many users bring these fobs to new alarm companies and use them like a 5834-4. There's no need to "take over" one, since they work with multiple panels. Learn more about key fobs.
Added:

If I Lose My Key Fob Can I Delete it from the System?
If your key fob becomes lost or stolen, you will be able to delete it from your security system. This will prevent the device from being used if it falls into the wrong hands. However, the process for deleting the key fob does vary between systems. Read on to learn how to delete a key fob.
Added:

How Do I Add a Key Fob Serial Number to a Honeywell L3000?
Adding a key fob serial number to a Honeywell L3000 is done through zone programming. Each button on a key fob will be assigned to its own individual zone on the L3000 system. Part of this process involves learning in the key fob using its unique serial number. Continue reading to learn more.
Added:

What Kind of Battery Goes In My Honeywell 5834-4?
The Honeywell 5834-4 uses a 3-volt lithium coin cell battery, such as the Honeywell CR2032. The battery is designed to power the 5834-4 for roughly 3 - 5 years. When the voltage of the battery drops below 2.3 volts, a low battery message will be displayed on the panel whenever a button is pressed.
Added:

How Do I Program a 5834-4 Key Fob to an L3000?
A 5834-4 key fob can be programmed into an L3000 system through the programming menu of the panel. You will need the installer code to access this menu.
Added:

What Battery Does the 5816 Use?
The Honeywell 5816 2 input wireless door/window contact uses the CR123 3 volt lithium battery. Learn about the 5816 and its compatible replacement battery.
Added:

How Many Wireless Zones Does a VISTA 10P Support?
The Honeywell Vista-10P control panel supports a total of 24 wireless zones. Find out what’s needed to add wireless devices to a Vista-10P control panel.
Added:

How Do I Get a 2GIG GC3 To See A High-Security 5834-4?
A 5834-4 is now set to High-Security mode from the factory, which will not work on a GC3. Read on to see how you can still use the 5834-4 with your 2GIG GC3.
Added:

What Key Fob Should I Use w/ My VISTA-10P, 15P, or 20P?
The recommended key fob to use with Vista-10p, 15p and 20p systems are the 5834-4 and the 5834-4EN. Discover which key fob you prefer.
Added:

How Many Wireless Zones Will a 6150RF Support?
Find out how many wireless zones a 6150RF will support
Added: