Honeywell 6160 Frequently Asked Questions

How Do I Make My 6160RF Chime When a Zone is Opened?
Enabling the chime on a 6160RF keypad is a very easy process. However, the user will need to know the Master Code for the system to enable this feature. Once the chime has been enabled, the keypad will chime whenever a zone is faulted. Learn more about the chime feature on a 6160RF keypad.
Added:

How Do I Program a Wired Zone on a Vista Panel?
Determine how you wish to connect your wired zone, then program each zone according to the way it is wired. Zone 1 must always be wired with a 2K end or line resistor. Zones 2 - 6 (15P) or 2 - 8 (20P, 21iP) can be programmed as Normally Open, Normally Closed, or EOL. Read on to learn more. Determine how you wish to connect your wired zone, then program each zone according to the way it is wired. Zone 1 must always be wired with a 2K end of line resistor. Zones 2 - 6 (15P) or 2 - 8 (20P, 21iP) can be programmed as Normally Open, Normally Closed, or EOL. Read on to learn more.
Added:

Is It Possible to Program a 21iP w/ a Tuxedo Touch?
It is possible to program a VISTA-21iP panel with a Tuxedo Touch, but there are keypads better suited for programming. One such keypad is the 6160 keypad.
Added:

Honeywell 6160 vs 6162?
The Honeywell 6160 and Honeywell 6162 are both alphanumeric, backlit keypads that can be used with a VISTA wired alarm system. Learn about the two keypads.
Added:

What Field is Device Programming on a VISTA-21iP?
There is no single device programming field on the 21iP. Device programming refers to any device connected to the keypad bus. Learn about device programming.
Added:

How Do I Turn On the Backlight on a Honeywell 6150 Keypad?
The Honeywell 6150 fixed English keypad's backlight is always on. A user can activate it by pressing any key on the keypad. Learn about Honeywell's backlights.
Added:

Can I Wire a 6150 to an AUX Power Supply?
A 6150 can be wired to a power supply if connecting to the panel’s power output requires too much current. Learn how to connect a 6150 to an AUX Power Supply.
Added:

Which Keypads Work with a VISTA 21iP?
The VISTA alarm systems are compatible with multiple different wired and wireless keypads. Learn about the keypads we offer that are compatible with the system.
Added:

Can VISTA Systems Use the 6160RF and Wireless Receivers?
Vista panels support hardwired and wireless expansion. Receivers can be stand alone, or built into a keypad. Learn about using the 6160RF with a Vista System.
Added:

How Do I Remove the VISTA 20P Expansion Module?
The Vista-20P supports both Wireless and Wired Zone Expansion. Learn how you can remove an expansion module and clear any trouble message this causes.
Added: