Honeywell L5200 Frequently Asked Questions

How Long Does a Honeywell Siren Sound When it’s Activated?
The length of time that an activated Honeywell siren will sound for depends on the panel's bell timeout setting. Once this duration of time has passed, the siren will stop making noise. It is possible to set different bell timeouts for security sirens and fire sirens. Keep reading to learn more.
Added:

How Long Does a House Alarm Sound For?
The alarm on a security system will sound for as long as the bell timeout is set for. Many panels feature separate timeout settings for fire alarms and burglary alarms. Most panels allow users to easily access these settings through the Installer menu. Learn more about bell timeout settings.
Added:

How Do I Setup the Slideshow on My Honeywell LYNX Touch?
The slideshow feature on a LYNX Touch will have a series of images appear on the panel's screen if the system is left idle for a predetermined period of time. To do this, you must have images uploaded to your LYNX Touch system. There is currently no way to upload new images. Read on to learn more.
Added:

Can I Add Sensors to My Home Alarm on My Own?
Programming sensors to a home alarm system is a task that can be completed by an end user. To do this, the user will need to know the Installer Code for their system. This code will allow the user to access zone programming so that they can program a sensor. Learn more about adding sensors.
Added:

How Do I Remotely Control a ZWSTAT from my Android or iOS Phone?
The ZWSTAT can be controlled remotely using either the Total Connect app or the Alarm.com app. You will use Total Connect if you have a Honeywell system. Alarm.com will be used if your system is a 2GIG or Qolsys model. You will need to have a monitoring plan that includes Total Connect or Alarm.com.
Added:

How Do I Program a 5802WXT to a Lynx Touch or Lyric Controller?
The 5802WXT wireless panic button can be programmed much in the same way as any other wireless sensor. This involves auto-learning in the serial number of the sensor through the zone programming mode of the panel. From there, adjust the settings for the device, and the 5802WXT will be ready for use.
Added:

Can I Install a Honeywell Lynx Touch Panel as DIY?
The Honeywell Lynx Touch Series of security panels are great systems for DIY users. The panels make it very easy for end users to complete any task with minimal technical support. This includes tasks such as enrolling wireless security devices with the panel and making communication module upgrades.
Added:

Where is the Power Button on an a LYNX Touch Security System?
The only true way to power down a LYNX Touch security system is to remove the AC power supply and the backup battery for the panel. This will cause the panel to shut down and remain off. It is also possible to perform a soft reset of the panel to have it power back on immediately after shutting off.
Added:

Can an L5000, L5100, L5200, L5210 or L7000 Work Together?
All of the Honeywell Lynx Touch panels are independent systems that are not designed to work with one another. If a user is looking to add an additional access point for their Lynx Touch panel, they can use a 5828 Keypad. This will give them a secondary location for arming and disarming their panel.
Added:

What Panels Support the Maintenance Feature on the 5808W3?
Any panel that supports 5800 Series wireless can support maintenance supervision on the 5808W3. Read on to see how this feature is enabled on each panel.
Added: