Honeywell L5200 Frequently Asked Questions

How Do I Activate a Honeywell 5800PIR-RES for Lyric or Lynx Panels
You can activate a Honeywell 5800PIR-RES by programming it into your Honeywell panel. Once activated, make sure to test the sensor in its final location.
Added:

How do I Setup the Honeywell 5800PIR-RES on a Lynx Touch?
In order to setup a Honeywell 5800PIR-RES motion detector, you must first program the sensor into your security panel and then install it onto a wall.
Added:

How Do I Cut the Time Delay on My Honeywell Lynx Touch Alarm System?
In order to cut the time delay on a Honeywell alarm system, the user must access the program menu and adjust the entry and exit delays to the desired length.
Added:

Why Won't My Honeywell L5200 Disarm?
The most common reason for an L5200 to not disarm is because the wrong user code is being entered. Check and make sure the correct code is being entered.
Added:

How Do I Register the 3GL Cellular Module on an L5200?
To register the 3GL cellular module on an L5200, you must contact your alarm monitoring company and provide them with the MAC and CRC of the communicator.
Added:

Will the Central Station Call Me if I Disarm My Alarm just After a False Alarm?
There is a possibility, when you disarm immediately after a false alarm, that the central station will see the cancellation signal, and not call you. Read on!
Added:

How Do I Make My Honeywell L5200 Work w/ AlarmNet 360?
The Honeywell L5200 will need a communicator installed to be able to work with AlarmNet 360. The learn how an alarm company can register the panel, read on.
Added:

How Do I Get into Programming on My Honeywell LYNX Touch?
The programming menu on a Honeywell LYNX Touch can be found within the panel's security menu. You will need to know your installer code to access the menu.
Added:

How Do I Turn Off My Lights when I Arm Away on My Honeywell Alarm System?
In order to automatically turn off your lights when you set your security panel to Arm Away, you will need to set up an automated Z-Wave scene with the panel.
Added:

How Do I Program a 5800RP to a Lyric Controller or a Lynx Touch?
A 5800RP is programmed to a Honeywell security system by assigning it to a zone. This will provide the panel with notices regarding the status of the 5800RP.
Added: