Honeywell L5200 Frequently Asked Questions

Where is the Power Button on an a LYNX Touch Security System?
The only true way to power down a LYNX Touch security system is to remove the AC power supply and the backup battery for the panel. This will cause the panel to shut down and remain off. It is also possible to perform a soft reset of the panel to have it power back on immediately after shutting off.
Added:

Can an L5000, L5100, L5200, L5210 or L7000 Work Together?
All of the Honeywell Lynx Touch panels are independent systems that are not designed to work with one another. If a user is looking to add an additional access point for their Lynx Touch panel, they can use a 5828 Keypad. This will give them a secondary location for arming and disarming their panel.
Added:

Can I Install a Honeywell Lynx Touch Panel as DIY?
The Honeywell Lynx Touch Series of security panels are great systems for DIY users. The panels make it very easy for end users to complete any task with minimal technical support. This includes tasks such as enrolling wireless security devices with the panel and making communication module upgrades.
Added:

What Panels Support the Maintenance Feature on the 5808W3?
Any panel that supports 5800 Series wireless can support maintenance supervision on the 5808W3. Read on to see how this feature is enabled on each panel.
Added:

How Do I Program a 5820L to a Lynx Touch Panel if the Serial Isn't on the Label?
If the serial number isn’t listed on your 5820L sensor, you can still learn it into your Lynx panel by auto-enrolling it through the zone programming menu.
Added:

How Do I Add a 5869 to a LYNX Touch or Lyric System?
A Honeywell 5869 can be added to a LYNX Touch or a Lyric system by programming the device to the panel and then installing the device in a desired location.
Added:

What is the Difference Between a Master Code and a Normal User Code?
A master code has the ability to add, edit, and delete other user codes. It can never deleted, only edited. A user code can only arm, disarm, and bypass.
Added:

How Do I Add a Honeywell 5811 to a Lynx Touch?
A 5811 wireless sensor can be programmed to a Honeywell LYNX Touch alarm system through system programming. Make sure to test the sensor after programming.
Added:

Can I Pre-Program a Honeywell L5200?
The L5200 cannot be sent pre-programmed by Alarm Grid. However, the programming process is relatively easy for an end-user, and our team is happy to help.
Added:

How Do I Register the Honeywell 3GL?
A Honeywell 3GL cellular communicator can be registered remotely by an alarm monitoring company, or it can be registered on-site at the security panel.
Added: