Honeywell L5210 Frequently Asked Questions

Can Alexa Arm and Disarm a Honeywell Alarm System?
Amazon Alexa can speak to Total Connect 2.0 to Arm a Honeywell System. But Alexa voice commands cannot be used to Disarm. Learn how to control your system using Amazon Alexa.
Added:

How Should I Program Report Codes If I'm Using a Self Monitoring Plan with Alarm Grid?
Users with a self-monitoring plan will want to disable all Report Codes. This is necessary for any panel connected with Total Connect 2.0. Learn how to disable Report Codes.
Added:

Can I Get an Alarm or a Specific Zone to Activate My Honeywell IP Camera?
By setting up a notification in Total Connect 2.0, you can have your Honeywell IP Cameras start recording when a specific system activity occurs. Learn about Honeywell IP Cameras.
Added:

Where Is the MAC Address Listed on a Honeywell L5210?
You can find the MAC address in the Comm Diagnostics Menu of panel programming. You will need the Installer Code to access the menu. Learn how to find the MAC address on an L5210.
Added:

How Do I Program a Honeywell 5877 to My L5210?
The Honeywell 5877 can be paired with a Honeywell L5210 System through the Automation Menu. The module must be wired with the garage door motor. Learn how to program the 5877.
Added:

Can I Update the Firmware On a Honeywell L5210, L7000 Alarm System?
The only way to update a Honeywell L5210 or L7000 System is to use the Honeywell LYNXTOUCH-MSD Firmware Updater Tool. Learn how to update the firmware on an L5210 or L7000 System.
Added:

How Do I Find the Firmware Revision for My Honeywell LYNX Touch System?
The firmware for a Honeywell LYNX Touch can be found within the Test Menu of the Master Tools Menu. It will be displayed at the top of the screen. Learn how to use the LYNX Touch.
Added:

What Is the Difference Between Arm Stay and Arm Instant?
When you set your system to Arm Instant, it will ignore any Entry Delay Periods. This means that an Entry/Exit Zone will cause an immediate alarm. Learn about system arming modes.
Added:

Will My Honeywell L5210 Work w/ SmartThings?
The L5210 can be used with SmartThings as a secondary controller. All Z-Wave devices paired with the L5210 will be pushed to the SamrtThings App. Learn about Samsung SmartThings.
Added:

How Do I Find the MAC/CRC on a Honeywell L5210?
The MAC and CRC codes for a Honeywell L5210 are found in the Comm Diagnostics Menu of Programming. You will need the Installer Code to access this menu. Learn about the L5210.
Added: