Honeywell L5210 Frequently Asked Questions
Where Do I Find the CRC on My Honeywell Wireless Alarm System?
The CRC code is also sometimes referred to as the MAC CRC. It is would in the Communication ID Numbers Menu. Learn how to find the CRC code on a Honeywell Wireless System.
How Do I Display the MAC ID on a Honeywell Wireless Alarm System?
The MAC ID on a Honeywell Wireless Panel can be found in the Communication ID Numbers Menu. The CRC is also found in this menu. Learn how to find the MAC ID on a Honeywell Panel.
Why Can't I Use WIFI With My LYNX Touch L5210 or L7000 System?
An L5210 or L7000 System can only support WIFI if you add an L5100-WIFI module. If you don't have an L5100-WIFI, you can't use WIFI with these panels. Learn about the L5100-WIFI.
Can Alexa Arm and Disarm a Honeywell Alarm System?
Amazon Alexa can speak to Total Connect 2.0 to Arm a Honeywell System. But Alexa voice commands cannot be used to Disarm. Learn how to control your system using Amazon Alexa.
How Should I Program Report Codes If I'm Using a Self Monitoring Plan with Alarm Grid?
Users with a self-monitoring plan will want to disable all Report Codes. This is necessary for any panel connected with Total Connect 2.0. Learn how to disable Report Codes.
Can I Get an Alarm or a Specific Zone to Activate My Honeywell IP Camera?
By setting up a notification in Total Connect 2.0, you can have your Honeywell IP Cameras start recording when a specific system activity occurs. Learn about Honeywell IP Cameras.
Where Is the MAC Address Listed on a Honeywell L5210?
You can find the MAC address in the Comm Diagnostics Menu of panel programming. You will need the Installer Code to access the menu. Learn how to find the MAC address on an L5210.
How Do I Program a Honeywell 5877 to My L5210?
The Honeywell 5877 can be paired with a Honeywell L5210 System through the Automation Menu. The module must be wired with the garage door motor. Learn how to program the 5877.
Can I Update the Firmware On a Honeywell L5210, L7000 Alarm System?
The only way to update a Honeywell L5210 or L7000 System is to use the Honeywell LYNXTOUCH-MSD Firmware Updater Tool. Learn how to update the firmware on an L5210 or L7000 System.
How Do I Find the Firmware Revision for My Honeywell LYNX Touch System?
The firmware for a Honeywell LYNX Touch can be found within the Test Menu of the Master Tools Menu. It will be displayed at the top of the screen. Learn how to use the LYNX Touch.
The CRC code is also sometimes referred to as the MAC CRC. It is would in the Communication ID Numbers Menu. Learn how to find the CRC code on a Honeywell Wireless System.
Added:
How Do I Display the MAC ID on a Honeywell Wireless Alarm System?
The MAC ID on a Honeywell Wireless Panel can be found in the Communication ID Numbers Menu. The CRC is also found in this menu. Learn how to find the MAC ID on a Honeywell Panel.
Added:
Why Can't I Use WIFI With My LYNX Touch L5210 or L7000 System?
An L5210 or L7000 System can only support WIFI if you add an L5100-WIFI module. If you don't have an L5100-WIFI, you can't use WIFI with these panels. Learn about the L5100-WIFI.
Added:
Can Alexa Arm and Disarm a Honeywell Alarm System?
Amazon Alexa can speak to Total Connect 2.0 to Arm a Honeywell System. But Alexa voice commands cannot be used to Disarm. Learn how to control your system using Amazon Alexa.
Added:
How Should I Program Report Codes If I'm Using a Self Monitoring Plan with Alarm Grid?
Users with a self-monitoring plan will want to disable all Report Codes. This is necessary for any panel connected with Total Connect 2.0. Learn how to disable Report Codes.
Added:
Can I Get an Alarm or a Specific Zone to Activate My Honeywell IP Camera?
By setting up a notification in Total Connect 2.0, you can have your Honeywell IP Cameras start recording when a specific system activity occurs. Learn about Honeywell IP Cameras.
Added:
Where Is the MAC Address Listed on a Honeywell L5210?
You can find the MAC address in the Comm Diagnostics Menu of panel programming. You will need the Installer Code to access the menu. Learn how to find the MAC address on an L5210.
Added:
How Do I Program a Honeywell 5877 to My L5210?
The Honeywell 5877 can be paired with a Honeywell L5210 System through the Automation Menu. The module must be wired with the garage door motor. Learn how to program the 5877.
Added:
Can I Update the Firmware On a Honeywell L5210, L7000 Alarm System?
The only way to update a Honeywell L5210 or L7000 System is to use the Honeywell LYNXTOUCH-MSD Firmware Updater Tool. Learn how to update the firmware on an L5210 or L7000 System.
Added:
How Do I Find the Firmware Revision for My Honeywell LYNX Touch System?
The firmware for a Honeywell LYNX Touch can be found within the Test Menu of the Master Tools Menu. It will be displayed at the top of the screen. Learn how to use the LYNX Touch.
Added: