Honeywell Lyric Alarm System Frequently Asked Questions

What is the Difference Between an Installer Code & User Code on a Lyric Security System?
A user code on a Lyric security system is used for arming and disarming the panel, while the installer code is used for gaining access to system programming. The installer code can also be used to arm the panel. However, the installer code can only disarm the panel if it was the code used to arm it.
Added:

How do I Enroll a Sensor on my LYNX L5210, L7000 or Lyric?
Enrolling a sensor on a Honeywell LYNX Touch or Lyric Controller can be done by accessing Zone Programming and then auto-enrolling the sensor with the panel.
Added:

What's the Best No-Contract Security System with Cameras?
Any Honeywell, 2GIG, or Qolsys system with compatible cameras and the Alarm Grid Platinum plan can provide no-contract monitoring service, including video, for an affordable rate. 2GIG and Qolsys panels use the Alarm.com platform, while Honeywell uses the Total Connect platform.
Added:

Can I Monitor My Existing Smoke Detectors Remotely?
Smoke detectors for a security system can be monitored through Total Connect or Alarm.com. The platform that is used will depend on the type of panel you have.
Added:

How Do I Connect the FF345 to a Lyric Controller?
A FF345 can be programmed with a Lyric Controller by entering into zone programming on the Lyric and then auto-enrolling the FF345 device with the system.
Added:

How Do I Perform a Walk Test on a Honeywell Lyric Controller?
A walk test can be performed on a Honeywell Lyric Controller by putting the system into walk test mode and then faulting any sensor that you want to test.
Added:

How Do I Connect a Lyric Wireless Security System to WIFI?
The Honeywell Lyric Controller can connect to WIFI by joining a WIFI network. The device comes with a built-in WIFI card, so no additional add-ons are needed.
Added:

How Do I Activate a Honeywell 5800PIR-RES for Lyric or Lynx Panels
You can activate a Honeywell 5800PIR-RES by programming it into your Honeywell panel. Once activated, make sure to test the sensor in its final location.
Added:

Can I Install a Window Contact on a Honeywell Alarm?
A window contact can be installed on any Honeywell panel. The optimal window sensor depends on the model of the panel and the applications that are needed.
Added:

How Do I Delete a Zone from My Lynx Touch or Lyric Panel?
A zone can be deleted in the programming menu of the panel. This is useful for when you no longer intend to use a wireless device with the security system.
Added: