Honeywell Lyric Alarm System Frequently Asked Questions

How Do I Program a 5800RP to a Lyric Controller or a Lynx Touch?
A 5800RP is programmed to a Honeywell security system by assigning it to a zone. This will provide the panel with notices regarding the status of the 5800RP.
Added:

What is the CRC Code For?
The CRC, or cyclical redundancy check, is in place to keep programmers from making typographical errors when activating a communicator. Learn more here!
Added:

Can I Mount a WAVE2 Siren Outside?
Though the WAVE2 siren’s operating temp is from 20F - 175F, it is not weatherproof and is rated for indoor use only. Continue reading for more about the WAVE2.
Added:

What if Someone Destroys My Lyric Before it Calls My Security Company?
The Honeywell Lyric system has a feature called APL to notify a monitoring company before its destroyed. Learn about Advanced Protection Logic feature.
Added:

How do I add a SIXSMOKE to my Lyric?
The Honeywell SIXSMOKE features a Photoelectric Smoke detector, and a Fixed as well as a Rate-of-Rise Heat sensor. See how to add a SIXSMOKE to a Lyric system.
Added:

What Interactive service Works w/ Honeywell Systems?
Alarm users now are more sophisticated, and want the ability to see and control their system remotely. See which services work with Honeywell Systems.
Added:

How do I Remove the Battery from My Honeywell 5811 Sensors?
To remove the battery from a Honeywell 5811 door/window sensor, use a small flathead screwdriver to pop it open. Learn more about the best techniques.
Added:

How Many Z-Wave Devices Does the Lyric Controller Support?
The Lyric panel has built in capabilities to program in Z-Wave devices. The panel can support up to 72 devices, to learn more please continue reading.
Added:

How Do I Connect a Lyric Alarm to WIFI?
The Lyric Controller comes with a built-in WIFI communicator, which can be used to communicate to central station. See how to connect your Lyric to WIFI.
Added:

What Loop Should My Honeywell Smoke Detector Be On For a Vista Panel?
Honeywell Smoke Detectors should be programmed as a fire zone on loop 1. Find out how many loops each Honeywell Smoke Detector has and what each loop supports.
Added: