Honeywell VISTA-128BPTSIA Frequently Asked Questions

Why Am I receiving a "Duplicate User Code" Error in TC2?
You will receive a "Duplicate User Code" error if trying to enable partitions on a system with the same 4-digit code assigned to more than one user. Learn to deal with this error.
Added:

How Do I Setup Partitioning On My Total Connect Account?
Existing Total Connect accounts will be prompted to "Enable Partitions". Choose "Configure Now" and follow the prompts. Learn to set up partitioning in Total Connect 2.0.
Added:

Do I Need a 5881ENH on My VISTA Security System?
A VISTA security system will not require a 5881ENH, or any other type of wireless receiver, if only hard-wired sensors are going to be used with the panel.
Added:

What Panels Support the Maintenance Feature on the 5808W3?
Any panel that supports 5800 Series wireless can support maintenance supervision on the 5808W3. Read on to see how this feature is enabled on each panel.
Added:

How Do I Reset the Polling Loop Smoke Detector on a VISTA 128BPT?
The 5193SD and 5193SDT smoke detectors do not contain sounders. Because of this, a reset is not required after a fire alarm occurs on the Vista 128BPT.
Added:

How do you power cycle a Honeywell VISTA?
Disconnect the positive leg of the battery. Find the plug-in transformer, unscrew it from the center of the outlet then unplug the transformer. Learn how to power cycle a Vista.
Added:

Will My Monitoring Company Change My Installer Code?
It is possible an alarm company will change the installer code for the security system. Some companies do this as a way of limiting what the user can do.
Added:

Which Chipset on a VISTA Works with Total Connect & a GSMV4G?
Vista-15P and Vista-20P version 9.12 or later, Vista-21iP version 3.13 or later, and Vista-128BPT and 250BPT all versions support Total Connect 2. Read on!
Added:

How Do I Enable Total Connect 2.0 on My Vista-Turbo Panel?
TC2 is enabled on Vista-Turbo panels in device programming. The communicator talks to the panel as 3 different device types, and each must be enabled. Read on!
Added:

Is there a Battery in a 2WT-B Photoelectric i3 Sensor?
No, the 2WT-B smoke detector, by System Sensor, is a low voltage smoke detector that gets its power from an alarm panel. Read on to see how the 2WT-B works.
Added: