Honeywell VISTA-128BPTSIA Frequently Asked Questions

How Do I Wire a 6162RF to a VISTA?
The 6162RF has 4 wires, two for power, and two for data. It connects to the keypad bus of the Vista panel. Learn to wire the 6162RF to a Vista panel.
Added:

How do I Set up a Honeywell 6160RF?
The 6160RF must be connected to the alarm panel, then properly addressed in order to work. Continue reading and learn how to set up the 6160RF keypad receiver.
Added:

What's the wire length limit on a Honeywell VISTA's polling loop?
There are strict limits on polling loop distance, based on current drawn, and wire gauge used. Learn the rules and limits for wiring the polling loop.
Added:

What Software Lets Me Make Changes on My VISTA 20P?
Users can make changes on a VISTA using Total Connect 2.0, or by hand programming it. A monitored alarm company who's a Honeywell dealer uses Compass. Read on.
Added:

How Do I Connect a 4193SN to a VISTA-128BPT, 250BPT or VISTA-50?
The 4193SN connects to the Vista-128BPT, 250BPT, or 50 through the polling loop on terminals 24 (Positive) and 25 (Negative). Learn how to wire the 4193SN.
Added:

How Do I Add a 4193SN to My VISTA-128BPT, 250BPT or VISTA-50?
The 4193SN is an expansion device which allows users to add conventional devices to the polling loop by programming its serial number into the zone(s). Read on.
Added:

Where Should I Install My Honeywell 5869 Panic Button?
Install the Honeywell 5869 Wireless Panic Button in a hidden but reachable place, away from metal, furniture, and appliances. Learn how to install a 5869.
Added:

How Do I Program a 4193SN to a VISTA-128BPT, 250BPT, or VISTA-50?
The Vista-128BPT and similar panels use a polling loop for wired expansion. In zone programming, use input type to identify zones. Learn to program a 4193SN.
Added:

Can a VISTA Security System Use 2 Wireless Receivers?
The number of receivers supported by a Vista panel depends on the panel used, as well as other factors. Find out how many wireless receivers are supported.
Added:

Can I Add a 5800WAVE Maintenance Zone to a 2GIG GC3?
Does the 2GIG GC3 support the 5800WAVE?
Added: