Interlogix Simon XTi-5 Frequently Asked Questions

What is the Difference Between the Installer and Dealer Codes on an Interlogix Simon XTi or XTi-5?
The Dealer Code on an Interlogix Simon XTi or XTi-5 System has slightly greater authority than the system's Installer Code. Some programming actions can only be performed using the Dealer Code. Learn more about the code authority levels on the Interlogix Simon XTi and XTi-5 Alarm Systems.
Added:

Will an Interlogix Simon XTi or XTi-5 Work w/ Apple HomeKit?
At this time, the Simon XTi and XTi-5 cannot be used with Apple HomeKit. This is because the Alarm.com Service has not yet received support from Apple HomeKit. But if HomeKit ever provides Alarm.com support, then these systems could be used with the app. Learn more about Apple HomeKit integrations.
Added:

Can I Make an Interlogix Simon XTi or XTi-5 a Secondary Z-Wave Controller?
The Simon XTi and XTi-5 cannot operate as a secondary Z-Wave controller. However, when a cellular communicator has been added to an Interlogix Simon XTi or XTi-5, the system will support Z-Wave home automation devices. Learn more about using Z-Wave with an Interlogix Simon XTi or XTi-5.
Added:

How Do I Add a Z-Wave Light to a Simon XTi or XTi-5?
A Z-Wave light is added to a Simon XTi or XTi-5 System by putting the panel into its learn mode and then activating the inclusion function on the light. The light should be cleared from the network before attempting to do this. Learn how to add a Z-Wave light to a Simon XTi or XTi-5 System.
Added:

Can I Connect to the Interlogix Simon XTi or XTi-5 w/ an iPad?
An Interlogix Simon XTi or XTi-5 System can be controlled by an iPad through the Alarm.com Mobile App. This app can be downloaded for free from the Apple App Store. The system will need active cellular service to sync with Alarm.com. Learn how to use an iPad with a Simon XTi or XTi-5.
Added:

How Long Does a Siren Sound on an Interlogix Simon XTi or XTi-5?
The siren on a Simon XTi or XTi-5 System will continue to sound until the siren timeout period expires. This can be set from anywhere between 2 minutes and 254 minutes. It can also be turned off to have the siren sound indefinitely. Learn how to adjust the Simon XTi and XTi-5 siren timeout.
Added:

Will Interlogix/GE Sensors Work on an Interlogix Simon XTi or XTi-5?
Interlogix/GE Sensors send wireless signals at a frequency of 319.5 MHz. They will work with the Interlogix Simon XTi and XTi-5 Systems since they accept incoming wireless signals at this frequency. Learn more about which wireless sensors can be used with the Simon XTi and XTi-5 Systems.
Added:

How Do I Reset an Interlogix Simon XTi or XTi-5 to Factory Defaults?
Resetting an Interlogix Simon XTi or XTi-5 System to factory default settings is accomplished by holding down the reset button while the system is powered on. The Alarm.com communicator must be removed while doing this. Learn how to reset a Simon XTi or XTi-5 System to factory default settings.
Added:

Will Honeywell 5800 Sensors Work on an Interlogix Simon XTi or XTi-5?
The Interlogix Simon XTi and XTi-5 Alarm Systems both feature a wireless receiver that accepts incoming signals at a frequency of 319.5 MHz. The Honeywell 5800 Sensors are not compatible since they operate at the 345 MHz frequency. Learn more about the sensors used with the Simon XTi and XTi-5.
Added:

How Do I Connect an Android to an Interlogix Simon XTi or XTi-5?
An Android device can control an Interlogix Simon XTi or XTi-5 using the Alarm.com Mobile App. This app is available for free download from the Google Play Store. The XTi or XTi-5 System will need to receive active cellular monitoring to do this. Learn more about the Alarm.com Mobile App.
Added: