Resideo Tuxedo Frequently Asked Questions

How Do I Enroll and Use My Z-Wave Thermostat With the New Tuxedo and TC2?
After pairing your Z-Wave thermostat with your Tuxedo Keypad, you should perform a Panel Sync to get it to appear on TC2. Learn how to set up a Z-Wave thermostat with a Tuxedo.
Added:

What is the Difference Between S0 and S2 Z-Wave Protocols?
The S2 Security Protocol is supported by all Z-Wave Plus V2 700-Series devices, as well as certain Z-Wave Plus 500-Series devices. Learn the difference between S2 and S0.
Added:

How Do I Check TC2 Server Connections for a Honeywell Home Tuxedo?
There is a sequence of commands you can perform to check the TC2 server connections for a Tuxedo Keypad. Learn how to check the TC2 server connections for a Honeywell Home Tuxedo.
Added:

How Do I Add a Z-Wave Device to a Honeywell Home Tuxedo?
The Tuxedo is a Z-Wave Plus controller that can pair with compatible Z-Wave smart home automation devices. Learn how to enroll a Z-Wave device with a Tuxedo Keypad.
Added:

How Do I Check the Firmware Version for My Resideo Tuxedo?
You may want to check the firmware version for your Tuxedo to verify that the device has been fully updated. Learn how to check the firmware version for your Tuxedo Keypad.
Added:

How Do I Clear a Latched Alarm Using a Honeywell Home Tuxedo?
A Honeywell VISTA uses a feature called Alarm Memory to ensure that the user is made aware of any alarm that occurred. Learn how to clear a latched alarm using a Tuxedo Keypad.
Added:

Can I Backdoor Into Programming Using a Honeywell Home Tuxedo?
The Resideo Tuxedo doesn't load fast enough to perform the backdoor method for getting into programming. Find out your options for getting into programming if you are locked out.
Added:

How Do I Bypass Zones On a Honeywell Home Tuxedo?
When you bypass a zone, the system knows to ignore that zone. Even if the sensor is faulted, no response will be triggered on the system. Learn how to bypass zones on the Tuxedo.
Added:

How Do I Check Zone Faults On a Honeywell Home Tuxedo?
If your Tuxedo Keypad has a yellow bar with "Not Ready Fault" across the top, then you may want to check for zone faults. Learn how to check zone faults on the Tuxedo.
Added:

How Do I Check the ECP and RIS Address On a Resideo Tuxedo?
The Resideo Tuxedo has a menu where you can confirm and change the device ECP and RIS Address. You need the Installer Code to access this menu. Learn about the Tuxedo Keypad.
Added: