Alarm Control Panels Frequently Asked Questions
How Do I Reset the Polling Loop Smoke Detector on a VISTA 128BPT?
The 5193SD and 5193SDT smoke detectors do not contain sounders. Because of this, a reset is not required after a fire alarm occurs on the Vista 128BPT.
What is the Difference Between a Master Code and a Normal User Code?
A master code has the ability to add, edit, and delete other user codes. It can never deleted, only edited. A user code can only arm, disarm, and bypass.
How Do I Enter Walk Test Mode on a Vista Panel?
You can enter walk test mode on the Vista-15P, 20P, 21iP panels by keying in Installer Code + [5] + [0]. The panel must be "Ready" to access test mode.
How do you power cycle a Honeywell VISTA?
Disconnect the positive leg of the battery. Find the plug-in transformer, unscrew it from the center of the outlet then unplug the transformer. Learn how to power cycle a Vista.
Will the Central Station Call Me if I Disarm My Alarm just After a False Alarm?
There is a possibility, when you disarm immediately after a false alarm, that the central station will see the cancellation signal, and not call you. Read on!
Will My Monitoring Company Change My Installer Code?
It is possible an alarm company will change the installer code for the security system. Some companies do this as a way of limiting what the user can do.
How do I set up GeoFence arming reminders on an iOS device in TC2.0?
GeoFence arming reminders alert when an associated device leaves the designated area, and the system is not armed. Learn to create a GeoFence arming reminder.
What is the "Abort Window Dialer Delay" on a 2GIG Security System?
The Abort Window Dial Delay can be applied to burglary zones, and gives a user the chance to disarm prior to an alarm report being sent. Read on to learn more.
How Can I Get My L5210 System Monitored By A Service?
Find out how to get a L52100 system monitored by a service
Can I Use the Honeywell 20P w/ Cameras?
Find out if the Honeywell 20P can use cameras
The 5193SD and 5193SDT smoke detectors do not contain sounders. Because of this, a reset is not required after a fire alarm occurs on the Vista 128BPT.
Added:
What is the Difference Between a Master Code and a Normal User Code?
A master code has the ability to add, edit, and delete other user codes. It can never deleted, only edited. A user code can only arm, disarm, and bypass.
Added:
How Do I Enter Walk Test Mode on a Vista Panel?
You can enter walk test mode on the Vista-15P, 20P, 21iP panels by keying in Installer Code + [5] + [0]. The panel must be "Ready" to access test mode.
Added:
How do you power cycle a Honeywell VISTA?
Disconnect the positive leg of the battery. Find the plug-in transformer, unscrew it from the center of the outlet then unplug the transformer. Learn how to power cycle a Vista.
Added:
Will the Central Station Call Me if I Disarm My Alarm just After a False Alarm?
There is a possibility, when you disarm immediately after a false alarm, that the central station will see the cancellation signal, and not call you. Read on!
Added:
Will My Monitoring Company Change My Installer Code?
It is possible an alarm company will change the installer code for the security system. Some companies do this as a way of limiting what the user can do.
Added:
How do I set up GeoFence arming reminders on an iOS device in TC2.0?
GeoFence arming reminders alert when an associated device leaves the designated area, and the system is not armed. Learn to create a GeoFence arming reminder.
Added:
What is the "Abort Window Dialer Delay" on a 2GIG Security System?
The Abort Window Dial Delay can be applied to burglary zones, and gives a user the chance to disarm prior to an alarm report being sent. Read on to learn more.
Added:
How Can I Get My L5210 System Monitored By A Service?
Find out how to get a L52100 system monitored by a service
Added:
Can I Use the Honeywell 20P w/ Cameras?
Find out if the Honeywell 20P can use cameras
Added: