Internet Security Systems Frequently Asked Questions

How Do I Add My Lyric Controller to My WIFI Network?
Adding your Honeywell Lyric to your WIFI network will allow you to set it up for alarm monitoring service. Learn how to connect the Honeywell Lyric Controller to WIFI.
Added:

How Do I Connect a 2GIG GC3e to WIFI?
The 2GIG GC3e has a built-in WIFI card for connecting to a WIFI network. The GC3e must still be set up with a cellular radio for connectivity with Alarm.com. Learn about the GC3e.
Added:

How Do I Activate a System for Monitoring with Alarm Grid?
There are many things you can do as an end user to make sure that your activation goes as smoothly as possible. Learn how to activate a system for alarm monitoring service.
Added:

Can I Program My VISTA 21iPLTE To Use IP Only?
A VISTA 21iPLTE has a built-in IP communicator for connecting with AlarmNet360. Cellular backup is optional, but recommended. Learn about VISTA 21iPLTE Communication Paths.
Added:

Can I Use a WIFI Communicator w/ a Honeywell Alarm System?
Most wireless Honeywell Systems have a compatible WIFI communicator that can be added. The Lyric comes with built in WIFI. Find out if your Honeywell System can do WIFI.
Added:

Which Alarm Panel Can be Monitored Over the Internet?
In order for an alarm system to receive internet monitoring, an IP communicator is needed. The communicator may need to be added separately. Learn more about internet monitoring.
Added:

Does the 2GIG GC3 Inform Me if it Loses Internet?
The 2GIG GC3 will not directly notify the user about internet loss. However, the panel can still remain connected to the network by using a cellular backup.
Added:

How Do I Cut the Time Delay on My Honeywell Lynx Touch Alarm System?
In order to cut the time delay on a Honeywell alarm system, the user must access the program menu and adjust the entry and exit delays to the desired length.
Added:

What is an 803 Signal on a VISTA Panel?
When an AlarmNet device on a Vista panel indicates a trouble condition for itself, it uses zone 803, to prevent confusion with a protection zone. Read on!
Added:

Can I Change the Rev Chip on a Vista 21iP?
Honeywell sells a PROM Chip for older versions of the VISTA 21iP that allows these systems to be used with Total Connect 2.0. Learn how to change the VISTA 21iP Rev Chip.
Added: