Wired Smoke Detectors Frequently Asked Questions
How Do I Wire a 2W-B?
The 2W-B is a two wire, photoelectric smoke detector which can be wired in parallel to zone 1 on most Honeywell Vista panels. Because the 2W-B is a normally open, life safety device, an end of line resistor is required for proper operation and supervision. Learn how to wire the 2W-B here.
Can I Monitor My Existing Smoke Detectors Remotely?
Smoke detectors for a security system can be monitored through Total Connect or Alarm.com. The platform that is used will depend on the type of panel you have.
How Do I Wire a 2-Wire Smoke Detector to My Wired Alarm System?
A 2-wire smoke detector connects directly to a hard-wired zone on a wired alarm system. Learn how to interface a 2-wire smoke with your wired alarm system.
How Do I Test My 521BXT Smoke Detector for Proper Function?
To test a 521BXT Smoke Detector for proper function, use canned smoke to test the device's smoke detection and a hair dryer to test its heat detection.
How Do I Test the ESL 521BXT for Heat Detection?
You can test the heat detection of the 521BXT by using a hair dryer to shoot hot air onto the device. A successful test will be indicated by a loud siren.
How Do I Clean My ESL 521BXT Smoke and Heat Detector?
You can clean your ESL 521 BXT Smoke and Heat Detector by removing the optical chamber inside the device and removing any dust and dirt that is present.
How Do I Test the ESL 521BXT for Smoke Detection?
To test a 521BXT for smoke detection, shoot canned smoke into the vents of the device. A loud siren emitting from the detector indicates a successful test.
How Do I Reset the Polling Loop Smoke Detector on a VISTA 128BPT?
The 5193SD and 5193SDT smoke detectors do not contain sounders. Because of this, a reset is not required after a fire alarm occurs on the Vista 128BPT.
Where Can I Buy System Sensor 4-Wire Smokes?
System sensor 4-wire smokes can be bought from most online alarm companies. Unlike wireless smokes, they are typically unavailable in standard retail outlets.
Is there a Battery in a 2WT-B Photoelectric i3 Sensor?
No, the 2WT-B smoke detector, by System Sensor, is a low voltage smoke detector that gets its power from an alarm panel. Read on to see how the 2WT-B works.
The 2W-B is a two wire, photoelectric smoke detector which can be wired in parallel to zone 1 on most Honeywell Vista panels. Because the 2W-B is a normally open, life safety device, an end of line resistor is required for proper operation and supervision. Learn how to wire the 2W-B here.
Added:
Can I Monitor My Existing Smoke Detectors Remotely?
Smoke detectors for a security system can be monitored through Total Connect or Alarm.com. The platform that is used will depend on the type of panel you have.
Added:
How Do I Wire a 2-Wire Smoke Detector to My Wired Alarm System?
A 2-wire smoke detector connects directly to a hard-wired zone on a wired alarm system. Learn how to interface a 2-wire smoke with your wired alarm system.
Added:
How Do I Test My 521BXT Smoke Detector for Proper Function?
To test a 521BXT Smoke Detector for proper function, use canned smoke to test the device's smoke detection and a hair dryer to test its heat detection.
Added:
How Do I Test the ESL 521BXT for Heat Detection?
You can test the heat detection of the 521BXT by using a hair dryer to shoot hot air onto the device. A successful test will be indicated by a loud siren.
Added:
How Do I Clean My ESL 521BXT Smoke and Heat Detector?
You can clean your ESL 521 BXT Smoke and Heat Detector by removing the optical chamber inside the device and removing any dust and dirt that is present.
Added:
How Do I Test the ESL 521BXT for Smoke Detection?
To test a 521BXT for smoke detection, shoot canned smoke into the vents of the device. A loud siren emitting from the detector indicates a successful test.
Added:
How Do I Reset the Polling Loop Smoke Detector on a VISTA 128BPT?
The 5193SD and 5193SDT smoke detectors do not contain sounders. Because of this, a reset is not required after a fire alarm occurs on the Vista 128BPT.
Added:
Where Can I Buy System Sensor 4-Wire Smokes?
System sensor 4-wire smokes can be bought from most online alarm companies. Unlike wireless smokes, they are typically unavailable in standard retail outlets.
Added:
Is there a Battery in a 2WT-B Photoelectric i3 Sensor?
No, the 2WT-B smoke detector, by System Sensor, is a low voltage smoke detector that gets its power from an alarm panel. Read on to see how the 2WT-B works.
Added: