Wireless Alarm Keypads Frequently Asked Questions

How Do I Clear a Check 850 Low Batt Keypad From a Honeywell Lyric Controller?
The Lyric will display a Check 850 Low Batt Keypad condition when a programmed LKP500 Keypad has a low battery. Learn how to clear a Check 850 Low Batt Keypad error.
Added:

Can I Use a DSC Keypad With the Qolsys IQ Panel 2 Plus?
The DSC WS9LCDW9 PowerG Keypad can be used with the Qolsys IQ Panel 2 Plus. The panel must be Version 2.3.2 or higher to properly support it. Learn about the DSC PowerG Keypad.
Added:

Does the 5828 Have Volume Control?
The volume control for the Honeywell 5828 Keypad allows you to increase and decrease the volume. However, you cannot mute the keypad entirely. Learn about the 5828 volume control.
Added:

What is the Standard Height for an Alarm Keypad?
Installing an alarm system keypad at an appropriate height will make it easier to use and operate on a daily basis. Find out the ideal height for an alarm system keypad.
Added:

How Do I Mute a Honeywell 5828V Wireless Keypad?
The Honeywell 5828V Wireless Keypad can be muted by pressing [#] + [2] + [1] for Lynx Touch Systems or [#] + [0] + [2] + [1] for VISTA Systems. Learn to mute the 5828V Keypad.
Added:

How Do Alarm Keypads Work?
Alarm Keypads are used for controlling an alarm system. Depending on the type of panel, a keypad can either be a primary or secondary access point. Learn more about alarm keypads.
Added:

How Do I Set The House ID For a Honeywell LYNX Touch?
The House ID Code for a LYNX Touch can be set from 01 to 31. It is used for communicating with bi-directional wireless devices. Find out how to set the House ID for a LYNX Touch.
Added:

How Do I Pair the 2GIG SP2 Keypad with the 2GIG GC3?
The 2GIG SP2 can only be paired with a 2GIG GC3 if the system is running firmware version 3.0.2 or higher. It is added through the Keypads Menu. Find out how to pair a 2GIG SP2.
Added:

Does The 2GIG GC3 Have A Compatible Touchscreen Keypad?
The 2GIG GC3 is compatible with the 2GIG SP1 and SP2 Touchscreen Keypads. These touchscreen devices will both work with the GC3. Find out how to use a keypad with the GC3.
Added:

How Do I Pair the 2GIG SP1 Keypad with the 2GIG GC3?
To pair the 2GIG SP1 with the 2GIG GC3, the GC3 must be running firmware version 3.1 or higher. It is added through the Keypads Menu. Learn how to pair the SP1 Keypad.To pair the 2GIG SP1 with the 2GIG GC3, the GC3 must be running firmware version 3.1.0.5572 or higher. It is added through the Keypads Menu. Learn how to pair the SP1 Keypad.
Added: