Wireless Alarm Keypads Frequently Asked Questions

Can I Use More than One Keypad On a DSC Impassa?
The DSC Impassa will support both the DSC WT5500 2-Way Wireless Keypad and the DSC WTK5504 2-Way Wireless TouchScreen Arming Station. Learn more about the Impassa keypad options.
Added:

Honeywell 5828V vs 5828
The only difference between the Honeywell 5828V Keypad and the Honeywell 5828 Keypad is that the 5828V Keypad has a voice feature. This means it will read out the zone descriptors whenever a zone is faulted. The 5828V can also be used to record an audible voice message that can be played back later.
Added:

Can an L5000, L5100, L5200, L5210 or L7000 Work Together?
All of the Honeywell Lynx Touch panels are independent systems that are not designed to work with one another. If a user is looking to add an additional access point for their Lynx Touch panel, they can use a 5828 Keypad. This will give them a secondary location for arming and disarming their panel.
Added:

Do the Honeywell Lynx Systems Require RF Line of Sight?
Honeywell Lynx Systems never use line of sight. RF communication does not require line of sight. Lynx panels use RF to communicate with 5800 Series devices.
Added:

How Do I Add a Remote Keypad to the Qolsys IQ Panel 2?
A keypad can be added to the Qolsys IQ Panel 2 by pairing the keypad with the panel from the installer menu. Only the IQ Remote will work as a remote keypad.
Added:

How Do You Connect a 2GIG TS1 Keypad with a 2GIG GC3 Panel?
The 2GIG TS1 wireless keypad is unable to connect with a 2GIG GC3 security panel. The 2GIG TS1 keypad is designed to be used with the 2GIG GC2 security panel.
Added:

Why Does My Security System Need a Honeywell 5800RP?
A wireless Honeywell security system needs a Honeywell 5800RP to extend the range of its radio frequency. This can solve issues such as RF supervision loss.
Added:

How do you add a 2GIG PAD1-345 to the 2GIG GC3?
The 2GIG PAD1-345 wireless keypad can be added to the 2GIG GC3 through the systems keypad programming. Learn how to add a 2GIG PAD1-345 to the GC3 system.
Added:

What Frequency Do the 5800 Sensors Operate at?
Honeywell's 5800 series wireless devices operate at 345 MHz. This frequency was assigned to them by the FCC, and should operate free of interference in the US.
Added:

How Do I Program a 5800RP to a Lyric Controller or a Lynx Touch?
A 5800RP is programmed to a Honeywell security system by assigning it to a zone. This will provide the panel with notices regarding the status of the 5800RP.
Added: