Wireless Combination CO/Smoke Detectors Frequently Asked Questions
How Do I Change the Batteries for the Honeywell SiXCOMBO?
The Honeywell SiXCOMBO uses four (4) lithium CR123A batteries for power. These batteries are often referred to as camera batteries. Learn how to change the SiXCOMBO batteries.
Can I Use the SiXCOMBO for Only Smoke or Only Heat Detection?
When programming the Honeywell SiXCOMBO, you have the option of disabling any function (smoke, heat, CO) that you don't want to use. Learn about the Honeywell SiXCOMBO.
Can Honeywell SiXCOMBO Devices be Interlinked?
Honeywell SiXCOMBO devices can use the One-Go-All-Go feature so that they are all interlinked and begin to sound when one device is activated. Learn about the Honeywell SiXCOMBO.
How Do I Open the Honeywell SiXCOMBO?
To open the SiXCOMBO, press it against its back plate, and twist it counter-clockwise. Close by aligning against the back plate and twisting clockwise. Learn to open the SiXCOMBO.
What is the Honeywell SiXCOMBO?
With the Honeywell SiXCOMBO, you get both fire and CO detection for your Lyric System. It offers wireless encryption and one-go-all-go functionality. Learn about the SiXCOMBO.
How Do I Properly Test My SiXCOMBO?
The Honeywell SiXCOMBO can be tested by using one of its two test buttons or by using canned smoke, a hair dryer, or canned CO. Learn how to test the Honeywell SiXCOMBO.
How Do I Program a SiXCOMBO to a Lyric Security System?
The SiXCOMBO offers smoke, heat, and CO detection. Each function will use one (1) zone, for three (3) zones in total. Learn how to enroll the SiXCOMBO with the Lyric.
How Do I Program the Honeywell 5800COMBO to a Honeywell VISTA Panel?
A Honeywell 5800COMBO can be programmed to a Honeywell VISTA Panel after a wireless receiver module has been added. Learn how to use a 5800COMBO with a VISTA System.
What is a Smoke/Heat Combination Detector Called?
A sensor that features both smoke and heat detection capabilities is simply called a "smoke and heat detector". Learn about smoke and heat detectors.
How Do I Reset the Fire Alarm on My Security System?
In most cases, disarming the system twice will reset the fire alarm and clear the display. The smoke detector must be free of smoke when doing this. Learn to reset the fire alarm.
The Honeywell SiXCOMBO uses four (4) lithium CR123A batteries for power. These batteries are often referred to as camera batteries. Learn how to change the SiXCOMBO batteries.
Added:
Can I Use the SiXCOMBO for Only Smoke or Only Heat Detection?
When programming the Honeywell SiXCOMBO, you have the option of disabling any function (smoke, heat, CO) that you don't want to use. Learn about the Honeywell SiXCOMBO.
Added:
Can Honeywell SiXCOMBO Devices be Interlinked?
Honeywell SiXCOMBO devices can use the One-Go-All-Go feature so that they are all interlinked and begin to sound when one device is activated. Learn about the Honeywell SiXCOMBO.
Added:
How Do I Open the Honeywell SiXCOMBO?
To open the SiXCOMBO, press it against its back plate, and twist it counter-clockwise. Close by aligning against the back plate and twisting clockwise. Learn to open the SiXCOMBO.
Added:
What is the Honeywell SiXCOMBO?
With the Honeywell SiXCOMBO, you get both fire and CO detection for your Lyric System. It offers wireless encryption and one-go-all-go functionality. Learn about the SiXCOMBO.
Added:
How Do I Properly Test My SiXCOMBO?
The Honeywell SiXCOMBO can be tested by using one of its two test buttons or by using canned smoke, a hair dryer, or canned CO. Learn how to test the Honeywell SiXCOMBO.
Added:
How Do I Program a SiXCOMBO to a Lyric Security System?
The SiXCOMBO offers smoke, heat, and CO detection. Each function will use one (1) zone, for three (3) zones in total. Learn how to enroll the SiXCOMBO with the Lyric.
Added:
How Do I Program the Honeywell 5800COMBO to a Honeywell VISTA Panel?
A Honeywell 5800COMBO can be programmed to a Honeywell VISTA Panel after a wireless receiver module has been added. Learn how to use a 5800COMBO with a VISTA System.
Added:
What is a Smoke/Heat Combination Detector Called?
A sensor that features both smoke and heat detection capabilities is simply called a "smoke and heat detector". Learn about smoke and heat detectors.
Added:
How Do I Reset the Fire Alarm on My Security System?
In most cases, disarming the system twice will reset the fire alarm and clear the display. The smoke detector must be free of smoke when doing this. Learn to reset the fire alarm.
Added: