Frequently Asked Questions

What's the Best Place to Install a Smoke Detector?
When choosing a location for a smoke detector, there are some things to remember. For example, it should be placed away from any vents or ducts that might affect its performance. It should also be at least 10 feet away from any kitchen appliances. Learn more about where to place a smoke detector.
Added:

Why Did My Panel Report Code E339 "Power on Reset"?
A Honeywell Panel will report the message E339 "Power on Reset" when its communicator has been reset. The communicator for a Honeywell System will reset whenever programming changes are sent to the module or when the module is powered off and then back on. Learn more about the E339 message.
Added:

Which Glass Break Sensors Work w/ ADT Security Systems?
ADT equipment is often comparable to that of Honeywell. In fact, many ADT sensors are simply re-branded Honeywell sensors. For that reason, Honeywell glass break sensors will often work with ADT alarm systems. Learn more about which glass break sensors are compatible with ADT security panels.
Added:

How Do I Turn Off Alarm Reporting for a Honeywell 5800 Series Motion Sensor?
Alarm reporting for a Honeywell 5800 Series Motion Sensor can be turned off through zone programming. This will instruct the system to not send out a distress signal to the central station if an alarm event involving that sensor were to occur. Learn more about alarm reporting on a motion sensor.
Added:

How Do I Remove a Z-Wave Device from Alarm.com?
There are three ways to remove a Z-Wave device from Alarm.com. The first is to manually exclude the sensor using the panel. The second is to have the alarm monitoring company remove the sensor. The third is to reset the Z-Wave controller and rebuild the network. Learn more about Z-Wave devices.
Added:

What Does an Alarm Do?
An alarm tells the system to send out a distress signal to a central monitoring station and/or the end user. This allows for emergency help to be requested as quickly as possible. The type of alarm that occurs depends on the Response Type for the zone. Learn more about the function of alarms.
Added:

Which Systems Can Alarm Grid Take Over?
Alarm Grid will support any alarm system that we can take over. To take over a system, the user may need to know the panel's Installer Code and/or Master Code. In some situations, the user will need to replace the system's communicator. Learn more about what systems we can take over.
Added:

Can I Add a Wired Siren to the Qolsys IQ Panel 2?
A wired siren can be added to a Qolsys IQ Panel 2 system. The device connects to the siren outputs on the back of the IQ Panel 2. The siren is powered using any 12VDC plug-in transformer. Once installed, it will function automatically. Learn more about using a wired siren with an IQ Panel 2.
Added:

What Is the Best Alarm Contact?
There is no single best alarm contact. Many different types of door and window contacts are available, and the best one depends on the needs of the user. There are several questions to ask when looking for an alarm contact so that you can obtain the perfect one. Learn more about alarm contacts.
Added:

How Do I Mount the ADC-V721W?
To mount the ADC-V721W, hold the mounting plate in the location where the camera will go. Then mark the location of the two holes to drill. Next, drill the two holes, along with a center hole for the cable. Finally, screw in the mounting plate, and attach the camera. Learn more about the ADC-V721W.
Added: