Frequently Asked Questions
Which Locks Work w/ an Interlogix Simon XT?
The Interlogix Simon XT will support any Z-Wave lock. The system will need to have an added Z-Wave controller to support the lock. Once the lock has been set up, the user can enter a valid system code into the lock's keypad to unlock it. Learn more about using locks with an Interlogix Simon XT.
How Many Hardwired Zones Are On an Interlogix Simon XT?
The Interlogix Simon XT will support up to 40 different zones. Two of these zones can be hardwired or wireless, while the other 38 can only be wireless. Hardwired sensors can also use a wireless transmitter to communicate with the Simon XT. Learn more about using hardwired zones with the Simon XT.
How Many Wireless Zones Are On an Interlogix Simon XT?
The Interlogix Simon XT provides support for up to 40 different security and life-safety zones. Two of these zones can be either hardwired or wireless, while the other 38 must be wireless. The system works with wireless sensors that operate at a frequency of 319.5 MHz. Learn more about the Simon XT.
Is there a Tilt Sensor Compatible w/ the Interlogix Simon XT?
Interlogix manufactures the TX-E401 Tilt Sensor that is compatible with their Simon XT System. This tilt sensor operates at a wireless frequency of 319.5 MHz. Other sensors that also operate at this same frequency are similarly compatible with the system. Learn more about the TX-E401 Sensor.
Can I Make an Interlogix Simon XT a Secondary Z-Wave Controller?
The Simon XT does not include a built-in Z-Wave controller. To use Z-Wave devices with the system, a user will need to install some type of Z-Wave controller. Even then, Z-Wave devices cannot be operated directly from the Simon XT Panel itself. Learn more about Z-Wave home automation.
Can I Turn Off the Siren for an Interlogix Simon XT?
The Interlogix Simon XT has a built-in piezo siren for sounding alarms. This siren can be disabled from the System Programming menu. Please note that you will need the Master Code for the system in order to access this menu. Find out how to turn off the siren on an Interlogix Simon XT.
Will 2GIG Sensors Work on an Interlogix Simon XT?
The Interlogix Simon XT is compatible with wireless sensors that operate at a wireless frequency of 319.5 MHz. However, 2GIG sensors operate at a wireless frequency of 345 MHz. This means that they are not compatible with the Simon XT System. Learn which sensors are compatible with the Simon XT.
How Do I Add a Key Fob to an Interlogix Simon XT?
A key fob is enrolled with an Interlogix Simon XT through the System Programming Menu. With the system in its learn more, press and hold the top two buttons on the key fob. This will enroll it with the system. You must then adjust its settings. Learn more about using a key fob with a Simon XT.
Can I Disable the Internal Siren on an Interlogix Simon XT?
The Simon XT System has an integrated piezo siren for sounding alarms. A user can disable this siren through system programming. The option is called "Panel Piezo Alarms". This process requires knowing the Master Code for the Simon XT System. Learn how to disable the siren on a Simon XT.
Will Alarm.com Work w/ an Interlogix Simon XT?
Alarm.com is the interactive service used with a Simon XT System. The service is used to arm and disarm the system, check the status of sensors and control Z-Wave devices. A Simon XT must have active cellular service before it can work with Alarm.com. Learn more about the Simon XT and Alarm.com.
The Interlogix Simon XT will support any Z-Wave lock. The system will need to have an added Z-Wave controller to support the lock. Once the lock has been set up, the user can enter a valid system code into the lock's keypad to unlock it. Learn more about using locks with an Interlogix Simon XT.
Added:
How Many Hardwired Zones Are On an Interlogix Simon XT?
The Interlogix Simon XT will support up to 40 different zones. Two of these zones can be hardwired or wireless, while the other 38 can only be wireless. Hardwired sensors can also use a wireless transmitter to communicate with the Simon XT. Learn more about using hardwired zones with the Simon XT.
Added:
How Many Wireless Zones Are On an Interlogix Simon XT?
The Interlogix Simon XT provides support for up to 40 different security and life-safety zones. Two of these zones can be either hardwired or wireless, while the other 38 must be wireless. The system works with wireless sensors that operate at a frequency of 319.5 MHz. Learn more about the Simon XT.
Added:
Is there a Tilt Sensor Compatible w/ the Interlogix Simon XT?
Interlogix manufactures the TX-E401 Tilt Sensor that is compatible with their Simon XT System. This tilt sensor operates at a wireless frequency of 319.5 MHz. Other sensors that also operate at this same frequency are similarly compatible with the system. Learn more about the TX-E401 Sensor.
Added:
Can I Make an Interlogix Simon XT a Secondary Z-Wave Controller?
The Simon XT does not include a built-in Z-Wave controller. To use Z-Wave devices with the system, a user will need to install some type of Z-Wave controller. Even then, Z-Wave devices cannot be operated directly from the Simon XT Panel itself. Learn more about Z-Wave home automation.
Added:
Can I Turn Off the Siren for an Interlogix Simon XT?
The Interlogix Simon XT has a built-in piezo siren for sounding alarms. This siren can be disabled from the System Programming menu. Please note that you will need the Master Code for the system in order to access this menu. Find out how to turn off the siren on an Interlogix Simon XT.
Added:
Will 2GIG Sensors Work on an Interlogix Simon XT?
The Interlogix Simon XT is compatible with wireless sensors that operate at a wireless frequency of 319.5 MHz. However, 2GIG sensors operate at a wireless frequency of 345 MHz. This means that they are not compatible with the Simon XT System. Learn which sensors are compatible with the Simon XT.
Added:
How Do I Add a Key Fob to an Interlogix Simon XT?
A key fob is enrolled with an Interlogix Simon XT through the System Programming Menu. With the system in its learn more, press and hold the top two buttons on the key fob. This will enroll it with the system. You must then adjust its settings. Learn more about using a key fob with a Simon XT.
Added:
Can I Disable the Internal Siren on an Interlogix Simon XT?
The Simon XT System has an integrated piezo siren for sounding alarms. A user can disable this siren through system programming. The option is called "Panel Piezo Alarms". This process requires knowing the Master Code for the Simon XT System. Learn how to disable the siren on a Simon XT.
Added:
Will Alarm.com Work w/ an Interlogix Simon XT?
Alarm.com is the interactive service used with a Simon XT System. The service is used to arm and disarm the system, check the status of sensors and control Z-Wave devices. A Simon XT must have active cellular service before it can work with Alarm.com. Learn more about the Simon XT and Alarm.com.
Added: