Frequently Asked Questions
How Do I Test a 2GIG GB1?
In order to test a 2GIG GB1 Glass Break Detector, you will need to use a glass break simulator, such as the Honeywell FG701. This will simulate the sound of breaking glass and cause the 2GIG GB1 to activate. If you receive central monitoring, have your system placed into test mode before doing this.
Can I Program My Alarm Using Just Total Connect 2.0?
Most alarm system programming is done at the panel and cannot be completed through the Total Connect 2.0 service. Total Connect 2.0 is mostly for interacting with your system once it has already been programmed, not for actually setting up the system. Read on to learn more about Total Connect.
How Do I Replace a Keyfob on a 2GIG Go!Control?
Replacing a keyfob on a 2GIG GC2 requires you to access system programming and then change the serial number of the old keyfob to the new one. You will need to know the system installer code to do this. Continue reading to learn the entire process for replacing keyfob on a 2GIG GC2 system.
Can I Program My Alarm Using Just Alarm.com?
The majority of panel programming cannot be conducted through Alarm.com. This includes enrolling new sensors and changing most settings Instead, most programming will need to be done on-site with the system itself. Learn more about Alarm.com and the features that it offers for security systems.
What Wireless Sensors Can I Use with the Honeywell Lyric Controller?
When looking for a new wireless sensor for a Honeywell Lyric Controller, you will want to choose a 5800 Series sensor or a SiX Series sensor. Any of these sensors will work well with the Lyric Controller. Check out the Alarm Grid website to find great wireless sensors for the Lyric Controller.
How Do I Setup a Lyric Thermostat in My Total Connect Account?
To connect a Lyric Round Thermostat with Total Connect, you will first get the thermostat online and connect it with the Lyric App. You will then integrate your Lyric App account information into Total connect. The thermostat can then be synced with the Lyric Controller. Read on to learn more.
Where Should I Install a Glass Break Sensor?
A glass break detector should be placed as close to a window or glass case as possible with no objects blocking its path. This will help to ensure that the device will activate in the event that the window or case is shattered. Learn more about glass break sensors and where to place them.
How Do I Save Recordings from the IPCAM-WO?
You can access any recordings that were made by an IPCAM-WO IP Camera from the Events log on Total Connect. Once you have located the video that you want to save, click the download button for that video. Continue reading to learn more about saving video recordings from Total Connect.
How Do I Test the 5800COMBO?
When testing the Honeywell 5800COMBO, you will want to start by first contacting your alarm monitoring company and placing your system on test mode. Then, you can individually test the smoke/heat detection and the carbon monoxide detection for the device. Learn more about testing the 5800COMBO.
What is the Best Alarm Keypad for a VISTA 20P?
When considering an alarm keypad for a Honeywell VISTA 20P, we recommend the 6160RF. The 6160RF is a great keypad that allows you to arm and disarm your system and make programming changes. It also conveniently includes a built-in wireless receiver. Keep reading to learn more about the 6160RF.
In order to test a 2GIG GB1 Glass Break Detector, you will need to use a glass break simulator, such as the Honeywell FG701. This will simulate the sound of breaking glass and cause the 2GIG GB1 to activate. If you receive central monitoring, have your system placed into test mode before doing this.
Added:
Can I Program My Alarm Using Just Total Connect 2.0?
Most alarm system programming is done at the panel and cannot be completed through the Total Connect 2.0 service. Total Connect 2.0 is mostly for interacting with your system once it has already been programmed, not for actually setting up the system. Read on to learn more about Total Connect.
Added:
How Do I Replace a Keyfob on a 2GIG Go!Control?
Replacing a keyfob on a 2GIG GC2 requires you to access system programming and then change the serial number of the old keyfob to the new one. You will need to know the system installer code to do this. Continue reading to learn the entire process for replacing keyfob on a 2GIG GC2 system.
Added:
Can I Program My Alarm Using Just Alarm.com?
The majority of panel programming cannot be conducted through Alarm.com. This includes enrolling new sensors and changing most settings Instead, most programming will need to be done on-site with the system itself. Learn more about Alarm.com and the features that it offers for security systems.
Added:
What Wireless Sensors Can I Use with the Honeywell Lyric Controller?
When looking for a new wireless sensor for a Honeywell Lyric Controller, you will want to choose a 5800 Series sensor or a SiX Series sensor. Any of these sensors will work well with the Lyric Controller. Check out the Alarm Grid website to find great wireless sensors for the Lyric Controller.
Added:
How Do I Setup a Lyric Thermostat in My Total Connect Account?
To connect a Lyric Round Thermostat with Total Connect, you will first get the thermostat online and connect it with the Lyric App. You will then integrate your Lyric App account information into Total connect. The thermostat can then be synced with the Lyric Controller. Read on to learn more.
Added:
Where Should I Install a Glass Break Sensor?
A glass break detector should be placed as close to a window or glass case as possible with no objects blocking its path. This will help to ensure that the device will activate in the event that the window or case is shattered. Learn more about glass break sensors and where to place them.
Added:
How Do I Save Recordings from the IPCAM-WO?
You can access any recordings that were made by an IPCAM-WO IP Camera from the Events log on Total Connect. Once you have located the video that you want to save, click the download button for that video. Continue reading to learn more about saving video recordings from Total Connect.
Added:
How Do I Test the 5800COMBO?
When testing the Honeywell 5800COMBO, you will want to start by first contacting your alarm monitoring company and placing your system on test mode. Then, you can individually test the smoke/heat detection and the carbon monoxide detection for the device. Learn more about testing the 5800COMBO.
Added:
What is the Best Alarm Keypad for a VISTA 20P?
When considering an alarm keypad for a Honeywell VISTA 20P, we recommend the 6160RF. The 6160RF is a great keypad that allows you to arm and disarm your system and make programming changes. It also conveniently includes a built-in wireless receiver. Keep reading to learn more about the 6160RF.
Added: