2GIG DW100-345 Frequently Asked Questions
How Do I Replace the Battery in a 2GIG-DW100-345 Sensor?
To replace the battery in a 2GIG-DW100-345 sensor, press the tab to open the housing, slide out the old CR2450 battery, and insert a new one with the + side up.
What Are the Mounting Guidelines for the 2GIG-DW100-345?
Mount the 2GIG-DW100-345 sensor on the door frame and the magnet on the door. Align the arrow marks, maintain proper gap distance, and avoid moisture or heat.
How Do I Change the Encryption Mode on a 2GIG-DW100-345?
To change the encryption mode on a 2GIG-DW100-345, open the sensor housing, locate the DIP switch, and set position 1 to ON for encrypted or OFF for standard.
How Do I Put the 2GIG GC Touch Into Wireless Learn Mode?
Put the 2GIG GC Touch into learn mode by accessing Sensor Settings in installer programming and selecting Quick Add or tapping the Learn button in Manual Add.
What Is the Default Master Code for the 2GIG GC Touch?
The default master code for the 2GIG GC Touch is 1111. This four-digit code grants homeowner access to user management, WIFI settings, and Z-Wave automation.
What Is the Default Installer Code for a 2GIG GC Touch?
The default installer code for the 2GIG GC Touch is 1561, giving full access to programming, configuration, and advanced settings. Click here for full details.
To replace the battery in a 2GIG-DW100-345 sensor, press the tab to open the housing, slide out the old CR2450 battery, and insert a new one with the + side up.
Added:
What Are the Mounting Guidelines for the 2GIG-DW100-345?
Mount the 2GIG-DW100-345 sensor on the door frame and the magnet on the door. Align the arrow marks, maintain proper gap distance, and avoid moisture or heat.
Added:
How Do I Change the Encryption Mode on a 2GIG-DW100-345?
To change the encryption mode on a 2GIG-DW100-345, open the sensor housing, locate the DIP switch, and set position 1 to ON for encrypted or OFF for standard.
Added:
How Do I Put the 2GIG GC Touch Into Wireless Learn Mode?
Put the 2GIG GC Touch into learn mode by accessing Sensor Settings in installer programming and selecting Quick Add or tapping the Learn button in Manual Add.
Added:
What Is the Default Master Code for the 2GIG GC Touch?
The default master code for the 2GIG GC Touch is 1111. This four-digit code grants homeowner access to user management, WIFI settings, and Z-Wave automation.
Added:
What Is the Default Installer Code for a 2GIG GC Touch?
The default installer code for the 2GIG GC Touch is 1561, giving full access to programming, configuration, and advanced settings. Click here for full details.
Added: