Honeywell 1361-GT Frequently Asked Questions

Can I Change the Honeywell VISTA 21iP’s PROM Chip?
Honeywell offers the V21iPUPG, which allows an older VISTA 21iP to use Total Connect 2.0 if an external communicator is added. Find out if you can change the VISTA 21iP PROM Chip.
Added:

How Do I Add a Siren to the Lyric Controller Using a MIMOlite?
A high current siren can be added to the Lyric System by using a power supply, a programmable output and a siren. Learn to attach a high current siren to a Lyric Alarm Panel.
Added:

What Kind of Transformer Does My Honeywell System Use?
Each Honeywell system requires a specific transformer to operate properly. New systems come with an appropriate transformer, but in some cases, a replacement may be required. There are also instances where it's appropriate to replace the original with a different one. Read on to learn more.Each Honeywell system requires a specific transformer to operate properly. New systems come with an appropriate transformer, but in some cases, a replacement may be required. There are also instances where it's appropriate to replace the original with a different one. Read on to learn more.
Added:

Where are the Transformers for Honeywell/ADEMCO Security Systems Typically Installed?
A transformer for a Honeywell/ADEMCO system is plugged into a wall outlet. These devices are usually in an outlet nearby the system for convenience purposes. However, some installers may place them in a hidden area, such as an attic. Learn more about where these transformers are plugged in.
Added:

What Kind of Wire Should I Use to Power My Honeywell Home Security Panel?
Most installations for a Honeywel alarm system involve using 18-gauge 2-conductor wire. The wire will run from a plug-in transformer to the panel itself. An excellent wire to use for this type of application is the Honeywell LT-Cable. Learn more about wiring a Honeywell control panel.
Added:

Where Can I Buy System Sensor 4-Wire Smokes?
System sensor 4-wire smokes can be bought from most online alarm companies. Unlike wireless smokes, they are typically unavailable in standard retail outlets.
Added:

How Do I Add a Honeywell Siren to a 2GIG GC3?
The 2GIG GC3 panel can have a Honeywell hard-wired siren installed directly to its circuit board. A siren can also be connected through a hard-wired relay.
Added:

Can I Wire a 6150 to an AUX Power Supply?
A 6150 can be wired to a power supply if connecting to the panel’s power output requires too much current. Learn how to connect a 6150 to an AUX Power Supply.
Added:

Honeywell iGSMHS4G vs GSMV4G
Learn about the differences between Honeywell iGSMHS4g vs GSMV4G
Added:

How do I add a Honeywell 748 siren to a L7000 or L5200?
Learn how to add a Honeywell 748 siren to a L7000 or L5200
Added: