IQ5 NS w/ Verizon LTE Frequently Asked Questions
How Do I Change the SIA Limits Setting on the IQ5 NS System?
Change SIA Limits on the IQ5 NS in the IQ Installer app. It is enabled by default and constrains the entry, exit, and dialer delay ranges for your compliance.
How Do I Delete All of the Sensors on the IQ5 NS System?
Delete all sensors on the IQ5 NS in the IQ Installer app by using the trash can icon on the Security Sensors page to erase every programmed sensor all at once.
How Do I Enable Power Down Communication on the IQ5 NS?
Enable Power Down Event Communication on the IQ5 NS in the IQ Installer app. It sends a unique event code when the panel is powered down by the Master Code.
How Do I Set Up PowerG Camera Images on the IQ5 NS System?
Change the PowerG camera image settings on the IQ5 NS in the IQ Installer app. Set how many images the PIR CAMs upload and which motion events they capture.
How Do I Enable EN Grade 2 Compliance on the IQ5 NS System?
Enable EN Grade 2 on the IQ5 NS in the IQ Installer app. This EN 50131 compliance mode changes entry procedures, trouble handling, and more automatically too.
How Do I Change the AC Delay Notification on the IQ5 NS?
Change the AC Delay Notification on the IQ5 NS in the IQ Installer app. Choose 1 to 60 minutes before an AC power loss reports to Alarm.com, with EN Grade 2 on.
How Do I Set Up RF Jam Detection on the IQ5 NS Alarm System?
Change the RF jam settings on the IQ5 NS in the IQ Installer app. Set PowerG RF Jam Detection to UL 20/20 or EN 30/60, plus legacy SRF Jam Detection options.
How Do I Stream Live Video to the IQ Remote on the IQ5 NS?
Stream live video to the IQ Remote on the IQ5 NS in the IQ Installer app. Turn it on so your camera feeds appear on your paired IQ Remote touchscreen keypads.
How Do I Change the Global Input Mode on the IQ5 NS System?
Change the Global Input Mode on the IQ5 NS in the IQ Installer app. Choose Normally Closed, End of Line, or Double End of Line for your global hardwired zones.
How Do I Set the Z-Wave Frequency Region on the IQ5 NS?
Set the Z-Wave Frequency Region on the IQ5 NS in the IQ Installer app under Installer Settings. It sets automatically by region, or pick your region by hand.
Change SIA Limits on the IQ5 NS in the IQ Installer app. It is enabled by default and constrains the entry, exit, and dialer delay ranges for your compliance.
Added:
How Do I Delete All of the Sensors on the IQ5 NS System?
Delete all sensors on the IQ5 NS in the IQ Installer app by using the trash can icon on the Security Sensors page to erase every programmed sensor all at once.
Added:
How Do I Enable Power Down Communication on the IQ5 NS?
Enable Power Down Event Communication on the IQ5 NS in the IQ Installer app. It sends a unique event code when the panel is powered down by the Master Code.
Added:
How Do I Set Up PowerG Camera Images on the IQ5 NS System?
Change the PowerG camera image settings on the IQ5 NS in the IQ Installer app. Set how many images the PIR CAMs upload and which motion events they capture.
Added:
How Do I Enable EN Grade 2 Compliance on the IQ5 NS System?
Enable EN Grade 2 on the IQ5 NS in the IQ Installer app. This EN 50131 compliance mode changes entry procedures, trouble handling, and more automatically too.
Added:
How Do I Change the AC Delay Notification on the IQ5 NS?
Change the AC Delay Notification on the IQ5 NS in the IQ Installer app. Choose 1 to 60 minutes before an AC power loss reports to Alarm.com, with EN Grade 2 on.
Added:
How Do I Set Up RF Jam Detection on the IQ5 NS Alarm System?
Change the RF jam settings on the IQ5 NS in the IQ Installer app. Set PowerG RF Jam Detection to UL 20/20 or EN 30/60, plus legacy SRF Jam Detection options.
Added:
How Do I Stream Live Video to the IQ Remote on the IQ5 NS?
Stream live video to the IQ Remote on the IQ5 NS in the IQ Installer app. Turn it on so your camera feeds appear on your paired IQ Remote touchscreen keypads.
Added:
How Do I Change the Global Input Mode on the IQ5 NS System?
Change the Global Input Mode on the IQ5 NS in the IQ Installer app. Choose Normally Closed, End of Line, or Double End of Line for your global hardwired zones.
Added:
How Do I Set the Z-Wave Frequency Region on the IQ5 NS?
Set the Z-Wave Frequency Region on the IQ5 NS in the IQ Installer app under Installer Settings. It sets automatically by region, or pick your region by hand.
Added: