Honeywell Home PROA7PLUS031

The Honeywell Home PROA7PLUS031 is a 3-1 system kit that includes a Honeywell Home PROA7PLUS Alarm Panel, three (3) PROSIXMINI3 Encrypted Door and Window Contact Sensors, one (1) PROSIXPIRV Encrypted Motion Sensor, and a Honeywell LT-Cable for providing power. The system comes WIFI ready.

As a 3-1 system kit, the Honeywell Home PROA7PLUS031 is good for smaller homes and apartments. There is no cellular communicator included with this kit, so the system will be relying entirely on WIFI connectivity. This is sometimes preferred by users who want to keep monitoring expenses as low as possible. And you can always upgrade to cellular by adding a compatible cellular communicator if you change your mind later. The best cellular communicators for the PROA7PLUS are the Honeywell Home PROLTE-A (AT&T LTE) and the Honeywell Home PROLTE-V (Verizon LTE).

The Honeywell Home PROA7PLUS supports Z-Wave Plus technology for smart home automation, automatic Bluetooth disarming, and up to four (4) unique system partitions. It is all built into a beautiful, modern alarm panel, with an intuitive UI and a crisp, clean, modern design. You can also control the system remotely using the Total Connect 2.0 platform, provided that this service is included in your monitoring plan. A former limitation of the PROA7PLUS was that it did not support local end-user programming but as of firmware version 03.591.92.0 it now supports programming at the panel. Another update, 03.1868.32.0, added support for integration with Apple HomeKit.

Important Note: The PROA7 and PROA7PLUS systems only support PROSIX and SiX series sensors from the factory. If you plan to use any legacy RF sensors, including Honeywell 5800 Series, 2GIG (non-encrypted) 345 MHz, Qolsys or Interlogix 319.5 MHz, DSC 433 MHz, or Bosch 433 MHz sensors, you will need to add a PROTAKEOVER module to your system.

Please read this notice regarding possible issues with Schlage Z-Wave locks.

Panel Specifications

• Panel Type: Wireless All-In-One
• Voltage Input: 9VDC, 2.5A Transformer (Included - P/N 300-10260)
• Backup Battery: 24 Hour Rechargeable Lithium Ion 3.6/4.2V, 5200mAH (Included - P/N 300-11186)
  
• Total Zones: 250 Security Protection Zones
• ProSix and SiX Series Zones: 127
• Legacy RF Support: 319.5 MHz, 345 MHz, 433 MHz, or Bosch (with added takeover module)
  
• Legacy RF Notes: Uni-Directional Only; Requires PROTAKEOVER Module
  
• KeyFob Slots: 32 (ProSix & SiX Fobs)
• User Codes: 96 (Master Code Hardcoded to Slot 1)
  
• Partitions: 4
  
• Automation: Z-Wave Plus
• Z-Wave Device Limit: 78
  
• Compatible Keypads: Resideo PROSIXLCDKP, Resideo PROWLTOUCH (Requires PROWIFIZW, which comes included)
  
• Max Keypads: 8
  
• Event Log: 4,000 Events
• Other Features: WIFI, Integrated Camera, Automatic Bluetooth Disarming, Wiselink (PROINDMV & PROOUTMV)
  
• Package Contents: PROA7Plus Panel, PROWIFIZW Module (Installed), Transformer (9VDC, 2.5A), Backup Battery, Manuals, Mounting Hardware w/ Wall Plate
• Dimensions: 5.75"L x 7.875"W x 1.0"D
  
• Mounting Options: Wall Mount or Desk Mount (Sold Separately)

Contact Sensor Specifications

• Sensor Type: Encrypted Wireless Door/Window Contact
• RF Frequency: 2.4 GHz
• Compatibility: Honeywell Home PROA7PLUS & PROA7 ; Resideo PROA7PLUSC & PROA7C ; VISTA H3
• Encryption: 128-bit AES
• Wireless Range: 300+ Feet in Open Air
• Magnet Spacing Gap: ≤ 1.0 in (25.4mm)
• Battery: Single 3V Lithium CR2 Battery (included)
• Recommended Batteries: EVE CR2, Panasonic CR2, Great Power CR2, Lisun CR2
• Low-Battery Detection: Below 2.3V
• LED Indicators: Yes
• Features: Auto-Enrollment, Tamper Detection, RF Supervision, Low Battery Detection
• Tamper Protected: Cover and Wall
• Auxiliary Input Terminal: No
• Sensor Dimensions: (H x W x L) 0.9 in x 1.0 in x 3.1 in (22.5 mm x 26.6 mm x 79.1 mm)
• Magnet Dimensions: (H x W x L) 0.6 in x 0.4 in x 1.7 in (14.9 mm x 10.8 mm x 43.7 mm)
• Operating Temperature: 32°F to 122°F (0°C to 50°C)
• Relative Humidity: 95 % max., non-condensing
• Indoor/Outdoor: Indoor Use Only
• Mounting Hardware: Included
• Approval Listings: FCC/IC, ETL Listed to UL 634, cETLus Listed to ULC/ORD-C634

Motion Sensor Specifications

• Sensor Type: Wireless Encrypted PIR Motion Sensor
• Compatibility: Honeywell Home PROA7PLUS & PROA7 ; Resideo PROA7PLUSC & PROA7C
• RF Frequency: 2.4 GHz
• Wireless Range: 375 Feet (114.3 m)
• Encryption: 128-bit AES
• Motion Detection: Passive Infrared (PIR)
• Coverage Area: 40' by 56' (12 m x 17 m)
• Pet Immunity: Up to 80 lbs.
• Mounting Height: 7 to 9 Feet (7.5 Feet Optimal)
• Mounting Options: Corner or Wall
• Sensitivity Adjustments: No
• Battery: 3V Lithium CR123A (included)
• Walk Test Mode: Yes
• LED Light: Yes
• Tamper Switch: Cover
• Auto Enrollment: Yes
• Low Battery Detection: Yes
• Other Features: Uniform Sensitivity Optics, Fresnel Lens, Advanced Temperature Compensation
• Dimensions: 4.1”L x 2.4”W x 1.6”D (104.1 mm x 61.0 mm x 40.6 mm)
• Operating Temperature: 32°F to 122°F (0°C to 50°C)
• Humidity: 95% max, non-condensing
• Indoor/Outdoor: Indoor Use Only
• Certifications: FCC/IC, cETLus Listed, UL 639, ULC-S306-03