Honeywell Home PROA7PLUS031A

The Honeywell Home PROA7PLUS031A is a 3-1 system kit with a Honeywell Home PROA7PLUS Panel, three (3) PROSIXMINI3 Encrypted Door and Window Sensors, one (1) PROSIXPIRV Encrypted Motion Sensor, a PROLTE-A AT&T LTE Communicator, and a Honeywell LT-Cable. This system is dual-path ready.

In most cases, a 3-1 system kit with three (3) contacts and one (1) motion sensor is purchased for a smaller home or an apartment. The system can then be easily expanded upon later if needed. The PROA7PLUS System in this kit comes with an AT&T LTE Communicator, and it can also connect to WIFI. This makes the system dual-path ready. WIFI usually serves as the primary communication path, and the cellular communicator provides backup connectivity in case the internet ever goes down. This will require a monitoring plan that includes cellular connectivity, such as an Alarm Grid Gold or Platinum Level Plan. Our Self and Full Central Station Plans are both good options.

The PROA7PLUS also offers integrated Z-Wave Plus capabilities right out of the box, as well as programmable automatic Bluetooth disarming and up to four (4) system partitions. You will appreciate the sleek and modern design of the alarm panel, as well as its intuitive user interface that allows you to navigate the menus with ease. We strongly recommend getting a monitoring plan with access to Total Connect 2.0 so that you can control your PROA7PLUS System remotely. This can be done using the TC2 website or mobile app. A former limitation of the PROA7PLUS was that it did not support local end-user programming but as of firmware version 03.591.92.0 it now supports programming at the panel. Another update, 03.1868.32.0, added support for integration with Apple HomeKit.

Important Note: The PROA7 and PROA7PLUS systems only support PROSIX and SiX series sensors from the factory. If you plan to use any legacy RF sensors, including Honeywell 5800 Series, 2GIG (non-encrypted) 345 MHz, Qolsys or Interlogix 319.5 MHz, DSC 433 MHz, or Bosch 433 MHz sensors, you will need to add a PROTAKEOVER module to your system.

Please read this notice regarding possible issues with Schlage Z-Wave locks.

Panel Specifications

• Panel Type: Wireless All-In-One
• Voltage Input: 9VDC, 2.5A Transformer (Included - P/N 300-10260)
• Backup Battery: 24 Hour Rechargeable Lithium Ion 3.6/4.2V, 5200mAH (Included - P/N 300-11186)
  
• Total Zones: 250 Security Protection Zones
• ProSix and SiX Series Zones: 127
• Legacy RF Support: 319.5 MHz, 345 MHz, 433 MHz, or Bosch (with added takeover module)
  
• Legacy RF Notes: Uni-Directional Only; Requires PROTAKEOVER Module
  
• KeyFob Slots: 32 (ProSix & SiX Fobs)
• User Codes: 96 (Master Code Hardcoded to Slot 1)
  
• Partitions: 4
  
• Automation: Z-Wave Plus
• Z-Wave Device Limit: 78
  
• Compatible Keypads: Resideo PROSIXLCDKP, Resideo PROWLTOUCH (Requires PROWIFIZW, which comes included)
  
• Max Keypads: 8
  
• Event Log: 4,000 Events
• Other Features: WIFI, Integrated Camera, Automatic Bluetooth Disarming, Wiselink (PROINDMV & PROOUTMV)
  
• Package Contents: PROA7Plus Panel, PROWIFIZW Module (Installed), Transformer (9VDC, 2.5A), Backup Battery, Manuals, Mounting Hardware w/ Wall Plate
• Dimensions: 5.75"L x 7.875"W x 1.0"D
  
• Mounting Options: Wall Mount or Desk Mount (Sold Separately)

Contact Sensor Specifications

• Sensor Type: Encrypted Wireless Door/Window Contact
• RF Frequency: 2.4 GHz
• Compatibility: Honeywell Home PROA7PLUS & PROA7 ; Resideo PROA7PLUSC & PROA7C ; VISTA H3
• Encryption: 128-bit AES
• Wireless Range: 300+ Feet in Open Air
• Magnet Spacing Gap: ≤ 1.0 in (25.4mm)
• Battery: Single 3V Lithium CR2 Battery (included)
• Recommended Batteries: EVE CR2, Panasonic CR2, Great Power CR2, Lisun CR2
• Low-Battery Detection: Below 2.3V
• LED Indicators: Yes
• Features: Auto-Enrollment, Tamper Detection, RF Supervision, Low Battery Detection
• Tamper Protected: Cover and Wall
• Auxiliary Input Terminal: No
• Sensor Dimensions: (H x W x L) 0.9 in x 1.0 in x 3.1 in (22.5 mm x 26.6 mm x 79.1 mm)
• Magnet Dimensions: (H x W x L) 0.6 in x 0.4 in x 1.7 in (14.9 mm x 10.8 mm x 43.7 mm)
• Operating Temperature: 32°F to 122°F (0°C to 50°C)
• Relative Humidity: 95 % max., non-condensing
• Indoor/Outdoor: Indoor Use Only
• Mounting Hardware: Included
• Approval Listings: FCC/IC, ETL Listed to UL 634, cETLus Listed to ULC/ORD-C634

Motion Sensor Specifications

• Sensor Type: Wireless Encrypted PIR Motion Sensor
• Compatibility: Honeywell Home PROA7PLUS & PROA7 ; Resideo PROA7PLUSC & PROA7C
• RF Frequency: 2.4 GHz
• Wireless Range: 375 Feet (114.3 m)
• Encryption: 128-bit AES
• Motion Detection: Passive Infrared (PIR)
• Coverage Area: 40' by 56' (12 m x 17 m)
• Pet Immunity: Up to 80 lbs.
• Mounting Height: 7 to 9 Feet (7.5 Feet Optimal)
• Mounting Options: Corner or Wall
• Sensitivity Adjustments: No
• Battery: 3V Lithium CR123A (included)
• Walk Test Mode: Yes
• LED Light: Yes
• Tamper Switch: Cover
• Auto Enrollment: Yes
• Low Battery Detection: Yes
• Other Features: Uniform Sensitivity Optics, Fresnel Lens, Advanced Temperature Compensation
• Dimensions: 4.1”L x 2.4”W x 1.6”D (104.1 mm x 61.0 mm x 40.6 mm)
• Operating Temperature: 32°F to 122°F (0°C to 50°C)
• Humidity: 95% max, non-condensing
• Indoor/Outdoor: Indoor Use Only
• Certifications: FCC/IC, cETLus Listed, UL 639, ULC-S306-03

Communicator Specifications

• Product Type: Cellular Communicator
• Compatibility: Honeywell Home PROA7PLUS
• Cellular Network: AT&T LTE
• Dimensions: 2.625"L x 1.625"W x 0.3125"D
• Current Draw (Idle): 30mA
• Current Draw (Transmitting): 490mA
• Operating Temperature: -10°F to 131°F
• Operating Humidity: 10% to 90%, Non-Condensing