DIY Wireless Security Systems Frequently Asked Questions
Is an Interlogix Simon XTi or XTi-5 Z-Wave Compatible?
A Simon XTi or XTi-5 can only support Z-Wave devices if a Z-Wave controller is added. The only compatible Z-Wave controller for these systems consists of an Alarm.com cellular communication module. Z-Wave devices can be operated from the panel or from Alarm.com. Learn more about Z-Wave.
How Do I Set Up Automation on My Interlogix Simon XTi or XTi-5?
In order to set up Z-Wave home automation for an Interlogix Simon XTi or XTi-5 System, a Z-Wave controller must be set up with the system. Z-Wave devices can then be added to the network. This can be done from the panel. Learn how to use Z-Wave home automation with an Interlogix Simon XTi or XTi-5.
How Do I Change the Volume of an Interlogix Simon XTi or XTi-5?
The volume for a Simon XTi or XTi-5 can be adjusted from the main settings menu. Click the gear icon in the lower-right corner of the screen. Use the up and down arrows to scroll between options. Find the volume options, and adjust the volume. Learn how to change the volume on a Simon XTi or XTi-5.
Can an Interlogix Simon XTi or XTi-5 be Self-Monitored?
It is possible to use a self-monitoring plan with an Interlogix Simon XTi or XTi-5 alarm system. This means that all alarm monitoring will occur through the Alarm.com service. The end user will be alerted via text or email to any alarm event. Learn more about self-monitoring alarm plans.
Is There a Tilt Sensor Compatible w/ Interlogix Simon XTi or XTi-5?
Any tilt sensor that operates at a wireless frequency of 319.5 MHz can be used with the Interlogix Simon XTi and XTi-5 Systems. Some of these compatible tilt sensors include the Interlogix TX-E401 and the Qolsys IQ Tilt. Learn which tilt sensors are compatible with Interlogix Systems.
How Do I Use an Interlogix Simon XT to Control a Garage Door?
To get a Simon XT to control a garage door, you must obtain a Z-Wave garage door opener and a Z-Wave controller for the system. The panel's Z-Wave controller will communicate with the Z-Wave garage door opener to raise and lower the garage door. Learn more about using Z-Wave with the Simon XT.
How Do I Get Power to an Interlogix Simon XT?
The Interlogix Simon XT gets its primary power from a 9-volt AC plug-in transformer. An 18-gauge two-conductor wire connects the panel and the transformer. The panel also uses a backup battery in case power from the AC transformer is ever lost. Learn more about the Simon XT power supply.
How Long Does the Interlogix Simon XT Backup Battery Last?
The Interlogix Simon XT receives power primarily from a 9-volt AC transformer. But if AC power to the system is ever lost, then the panel will rely on its backup battery. The backup battery requires a replacement roughly every two to three years. Learn more about the Simon XT System.
What Kind of Wire Do I Need to Use to Install an Interlogix Simon XT?
The Interlogix Simon XT connects with a 9-volt AC transformer to receive power. This connection is made using 18-gauge two-conductor wire. Since AC power is used, polarity is not an issue. The AC transformer is plugged-in to the wall. Learn more about providing power to a Simon XT System.
How Do I Enroll a Schlage Z-Wave Lock on an Interlogix Simon XT?
A Schlage Z-Wave lock is enrolled with an Interlogix Simon XT by first putting the system into Z-Wave inclusion mode. Next, activate the inclusion function on the lock. The system should recognize the lock and learn it in. Learn how to enroll a Schlage Z-Wave lock with a Simon XT System.
A Simon XTi or XTi-5 can only support Z-Wave devices if a Z-Wave controller is added. The only compatible Z-Wave controller for these systems consists of an Alarm.com cellular communication module. Z-Wave devices can be operated from the panel or from Alarm.com. Learn more about Z-Wave.
Added:
How Do I Set Up Automation on My Interlogix Simon XTi or XTi-5?
In order to set up Z-Wave home automation for an Interlogix Simon XTi or XTi-5 System, a Z-Wave controller must be set up with the system. Z-Wave devices can then be added to the network. This can be done from the panel. Learn how to use Z-Wave home automation with an Interlogix Simon XTi or XTi-5.
Added:
How Do I Change the Volume of an Interlogix Simon XTi or XTi-5?
The volume for a Simon XTi or XTi-5 can be adjusted from the main settings menu. Click the gear icon in the lower-right corner of the screen. Use the up and down arrows to scroll between options. Find the volume options, and adjust the volume. Learn how to change the volume on a Simon XTi or XTi-5.
Added:
Can an Interlogix Simon XTi or XTi-5 be Self-Monitored?
It is possible to use a self-monitoring plan with an Interlogix Simon XTi or XTi-5 alarm system. This means that all alarm monitoring will occur through the Alarm.com service. The end user will be alerted via text or email to any alarm event. Learn more about self-monitoring alarm plans.
Added:
Is There a Tilt Sensor Compatible w/ Interlogix Simon XTi or XTi-5?
Any tilt sensor that operates at a wireless frequency of 319.5 MHz can be used with the Interlogix Simon XTi and XTi-5 Systems. Some of these compatible tilt sensors include the Interlogix TX-E401 and the Qolsys IQ Tilt. Learn which tilt sensors are compatible with Interlogix Systems.
Added:
How Do I Use an Interlogix Simon XT to Control a Garage Door?
To get a Simon XT to control a garage door, you must obtain a Z-Wave garage door opener and a Z-Wave controller for the system. The panel's Z-Wave controller will communicate with the Z-Wave garage door opener to raise and lower the garage door. Learn more about using Z-Wave with the Simon XT.
Added:
How Do I Get Power to an Interlogix Simon XT?
The Interlogix Simon XT gets its primary power from a 9-volt AC plug-in transformer. An 18-gauge two-conductor wire connects the panel and the transformer. The panel also uses a backup battery in case power from the AC transformer is ever lost. Learn more about the Simon XT power supply.
Added:
How Long Does the Interlogix Simon XT Backup Battery Last?
The Interlogix Simon XT receives power primarily from a 9-volt AC transformer. But if AC power to the system is ever lost, then the panel will rely on its backup battery. The backup battery requires a replacement roughly every two to three years. Learn more about the Simon XT System.
Added:
What Kind of Wire Do I Need to Use to Install an Interlogix Simon XT?
The Interlogix Simon XT connects with a 9-volt AC transformer to receive power. This connection is made using 18-gauge two-conductor wire. Since AC power is used, polarity is not an issue. The AC transformer is plugged-in to the wall. Learn more about providing power to a Simon XT System.
Added:
How Do I Enroll a Schlage Z-Wave Lock on an Interlogix Simon XT?
A Schlage Z-Wave lock is enrolled with an Interlogix Simon XT by first putting the system into Z-Wave inclusion mode. Next, activate the inclusion function on the lock. The system should recognize the lock and learn it in. Learn how to enroll a Schlage Z-Wave lock with a Simon XT System.
Added: