Frequently Asked Questions
How Do I Install a Magnet on French Doors?
Installing a contact and magnet on a French door requires that the magnet is set on the opening part of the door and the contact is on the frame above it.
How Do I Add Alarm Sensors to a Double Sliding Door?
When adding a contact to a double sliding door, you will most likely need to use two sensors. This will allow for an opening from either side to be detected.
Does 2GIG Have Crash & Smash protection?
All panels that are supported on the Alarm.com platform can be enabled with the Crash & Smash feature. This includes the 2GIG GC2 and GC3 security systems.
How Do I Control my 2GIG GC3 via WIFI?
In order to use WIFI connectivity with the 2GIG GC3, the panel must have the required Firmware Update installed. It can then connect with a WIFI network.
How Do I Connect the FF345 to a Lyric Controller?
A FF345 can be programmed with a Lyric Controller by entering into zone programming on the Lyric and then auto-enrolling the FF345 device with the system.
How Do I Check the Firmware Version on My 2GIG GC3?
The current Firmware Version of your 2GIG GC3 system can be found under System Info And Usage which can be accessed from the home screen of the GC3 panel.
How Do I Perform a Walk Test on a Honeywell Lyric Controller?
A walk test can be performed on a Honeywell Lyric Controller by putting the system into walk test mode and then faulting any sensor that you want to test.
How Do I Get Power to a Qolsys IQ Panel 2?
A Qolsys IQ Panel 2 receives power from its included power supply. The power supply for the system plugs into the back of the IQ Panel 2 and into an outlet. Learn to power an IQ2.
How Do I Connect My iPhone to a Qolsys IQ Panel 2?
In order to connect an iPhone to a Qolsys IQ Panel 2, you will need a cellular monitoring plan, an Alarm.com account and the Alarm.com app on your iPhone.
Can I Make the Honeywell L3000 Call My Phone?
The Honeywell L3000 can call a phone number using its Follow Me feature. This will inform users about certain system events that occur on their L3000 panel.
Installing a contact and magnet on a French door requires that the magnet is set on the opening part of the door and the contact is on the frame above it.
Added:
How Do I Add Alarm Sensors to a Double Sliding Door?
When adding a contact to a double sliding door, you will most likely need to use two sensors. This will allow for an opening from either side to be detected.
Added:
Does 2GIG Have Crash & Smash protection?
All panels that are supported on the Alarm.com platform can be enabled with the Crash & Smash feature. This includes the 2GIG GC2 and GC3 security systems.
Added:
How Do I Control my 2GIG GC3 via WIFI?
In order to use WIFI connectivity with the 2GIG GC3, the panel must have the required Firmware Update installed. It can then connect with a WIFI network.
Added:
How Do I Connect the FF345 to a Lyric Controller?
A FF345 can be programmed with a Lyric Controller by entering into zone programming on the Lyric and then auto-enrolling the FF345 device with the system.
Added:
How Do I Check the Firmware Version on My 2GIG GC3?
The current Firmware Version of your 2GIG GC3 system can be found under System Info And Usage which can be accessed from the home screen of the GC3 panel.
Added:
How Do I Perform a Walk Test on a Honeywell Lyric Controller?
A walk test can be performed on a Honeywell Lyric Controller by putting the system into walk test mode and then faulting any sensor that you want to test.
Added:
How Do I Get Power to a Qolsys IQ Panel 2?
A Qolsys IQ Panel 2 receives power from its included power supply. The power supply for the system plugs into the back of the IQ Panel 2 and into an outlet. Learn to power an IQ2.
Added:
How Do I Connect My iPhone to a Qolsys IQ Panel 2?
In order to connect an iPhone to a Qolsys IQ Panel 2, you will need a cellular monitoring plan, an Alarm.com account and the Alarm.com app on your iPhone.
Added:
Can I Make the Honeywell L3000 Call My Phone?
The Honeywell L3000 can call a phone number using its Follow Me feature. This will inform users about certain system events that occur on their L3000 panel.
Added: