2GIG GC3 Frequently Asked Questions

Can I Use the 2GIG GC3 w/o Paying for a Subscription?
If a 2GIG GC3 is used without a paid monitoring subscription, then it can only serve as a local noisemaker. Find out what this means and why monitoring service is very important.
Added:

How Do I Add Additional Keypads to a 2GIG GC3?
The 2GIG GC3 Alarm System has a Keypad Menu where new keypads can be enrolled. The system supports the SP1, SP2 and PAD1-345 Keypads. Learn how to set up a keypad with a 2GIG GC3.
Added:

How Do I Program the Honeywell 5800COMBO to the 2GIG GC3?
For full functionality, the 5800COMBO will use four zones on the 2GIG GC3 - smoke/heat, CO detection, freeze and maintenance. Learn how to program the 5800COMBO to the 2GIG GC3.
Added:

What is the Range on a 2GIG Security System?
For 2GIG 345 MHz Sensors, the wireless signal range is roughly 350 feet in open air. The range may vary between sensors. Find out the signal range of a 2GIG Alarm System.
Added:

What is a Partition?
A partition is a separate section of an alarm system that can be controlled independently from other areas of the system. Learn how using partitions can benefit your system.
Added:

How Do I Program the Honeywell 5806W3 to the 2GIG GC3?
The programming process for the Honeywell 5806W3 is completed through the wireless zones menu of the GC3 System. Learn how to program a Honeywell 5806W3 to a 2GIG GC3.
Added:

How Do I Program the Honeywell 5808W3 to the 2GIG GC3?
The Honeywell 5808W3 can learn-in with the 2GIG GC3 through its wireless enrollment mode. It will require two zones for full functionality. Learn how to enroll a 5808W3.
Added:

How Do I Enroll a 2GIG SP1 or SP2 Keypad in AP Mode?
Pairing a 2GIG SP1 or Sp2 Keypad in access point mode can be useful if the area's WIFI connection is rather weak. Learn how to enroll a 2GIG SP1 or SP2 Keypad in AP Mode.
Added:

What is the Best Z-Wave Compatible Security System?
For optimal Z-Wave functionality, we recommend using a Z-Wave Plus controller. Both the IQ Panel 2 Plus and 2GIG GC3 offer Z-Wave Plus. Find out which Z-Wave alarm system to use.
Added:

Should I Arm My System with My Installer Code?
Arming your system with the installer code is never a good idea. An intruder will be able to use that code to disarm the system. Learn more about system codes and how they work.
Added: