Interlogix Simon XT Frequently Asked Questions

How Do I Connect an Android to an Interlogix Simon XT?
An Android device can use the Alarm.com Mobile App to connect with a Simon XT. The user will need to have an active Alarm.com account with a synced Simon XT System to do this. The panel must have cellular service to work with Alarm.com. Learn how to connect an Android device with a Simon XT.
Added:

How Do I Add Additional User Codes to an Interlogix Simon XT?
The Simon XT System will support up to eight different user codes. These codes are used for arming and disarming the panel, and they are set up through System Programming. You will need to know the Master Code for the system to create new user codes. Learn how to set up user codes on a Simon XT.
Added:

How Do I Add a Key Fob to an Interlogix Simon XT?
A key fob is enrolled with an Interlogix Simon XT through the System Programming Menu. With the system in its learn more, press and hold the top two buttons on the key fob. This will enroll it with the system. You must then adjust its settings. Learn more about using a key fob with a Simon XT.
Added:

How Do I Add a Wireless Zone to an Interlogix Simon XT?
Wireless zones for an Interlogix Simon XT are configured through the System Programming Menu. With the system in its learn mode, activate the sensor tamper to learn it in. Then configure the settings for that zone. Learn how to enroll a wireless sensor with an Interlogix Simon XT System.
Added:

Can an Interlogix Simon XT be Self-Monitored?
An Interlogix Simon XT can be used for self-monitoring once the panel has been synced with the Alarm.com interactive service. This service is necessary for alerting the user when an alarm event occurs on their security system. Find out how to use an Interlogix Simon XT for self-monitoring.
Added:

Can I Change the Volume of an Interlogix Simon XT?
The volume for an Interlogix Simon XT can be adjusted through system programming. To access this menu, the Master Code for the system must be entered. Different volumes can be set for the speaker volume and the status beep volume. Learn more about the volume on an Interlogix Simon XT.
Added:

How Do I Add an Interlogix Simon XT to My Local WIFI?
The Simon XT cannot connect to a WIFI network. This is because there is currently no official WIFI card for the panel. Instead, Simon XT users should look into using cellular communication with their system. Cellular service will allow the system to access Alarm.com. Learn more about the Simon XT.
Added:

Can I Use Z-Wave Devices with an Interlogix Simon XT?
The Interlogix Simon XT is capable of interfacing with Z-Wave devices. However, a Z-Wave controller must be installed in the panel in order to do this. A cellular communicator for a Simon XT usually includes a built-in Z-Wave controller. Learn more about using Z-Wave with a Simon XT.
Added:

Can I Arm/Disarm an Interlogix Simon XT From My Phone?
A user can arm and disarm their Simon XT System using their phone if the system is connected with the Alarm.com service. This process involves using the Alarm.com Mobile App to send a signal to the Simon XT System for arming and disarming. Learn more about using Alarm.com with a Simon XT.
Added:

Can I Set Up WIFI as Primary & GSM as backup on an Interlogix Simon XT?
At this time, Interlogix does not offer WIFI connectivity for their Simon XT System. Instead, a user only has the option of adding a cellular communicator to the panel. This is not a concern due to the outstanding performance and reliability of cellular communication. Learn more about the Simon XT.
Added: