Submitted on 05/03/2013 shane
Works great, price is great, it is easy to use.
Submitted on 05/03/2013 shane
Submitted on 04/24/2013 Steve
This kit offered exactly what my wife and I wanted in the ability to arm and disarm our system remotely. The installation was simple and the support from Sterling was terrific. He walked me through each step of the programing. I had to end the initial call before we were done and he told me when he would call back and to my suprise he did!
AlarmGrid get's an "A" in my book and Sterling "A+". He is what "Good Customer Service" is all about and AlarmGrid should be happy they have him.
Submitted on 04/15/2013 Jill C.
I recently bought a Honeywell ZWSTAT and thanks to the techs at Alarm Grid I finally have it properly configured. Now my electrical bill has been cut in HALF because my a/c no longer runs when my husband and I are at work.
This thing will have paid for my entire alarm system by the end of summer. Then it's like my alarm system is paying me!! Who else can claim that??
Submitted on 04/15/2013 Garrett
I needed to upgrade my panel, but I didn't want to buy the tc2 kits because I am monitored over IP. This saved me a$100.
Submitted on 03/22/2013 Jill
This desk mount was perfect for our small apartment. We're renting and did not want to lose our security deposit over an alarm system! Now I'm able to arm our system right from my bed where I have our L5100 mounted on our night stand. Thanks Honeywell for this great product!
Submitted on 02/27/2013 Mark Espinosa
Purchased this switch to add sensing for my integrated whole house security system. This switch works perfectly. Easy to mount, magnet on flange is adjustable as well. Armored cable is a plus. Overall I would highly recommend this high quality switch assembly to any residential/commercial installation. In addition, the price is very reasonable.
Submitted on 02/24/2013 George
I worked with Sterling and found him to be very knowledgeable on the Lynx 5100 system and made the whole setup process very easy. Between the Honeywell system and the Total Connect system via Alarm Grid, I find the this to be a very amazing system and monitoring company. I would recommend Alarm Grid to anyone I know.
Submitted on 01/19/2013 Randy
I'm not an electrician, I don't know anything about stripping wires. I wanted to install my own security system because I didn't feel like paying an installer big money just to come in and do something I could do easily on my own. This made the entire process super super easy.
Submitted on 01/06/2013 Kevin
I bought a couple of these as a method for monitoring whether my garage doors were up or down. I needed something that had a little more distance between the magnet and sensor than just a standard door/window sensor and these can have up to a 2.5 inch gap.
While they are suppose to be drilled into the concrete and then mounted to the door, I didn't want to do this. I actually mounted the sensor to a couple of brackets that are similar to the infrared garage door "eyes" that prevent a door from coming down if something is blocking the beam. The brackets are mounted about 7 feet high, just before the curve in the garage door track so that none of our vehicle would hit them. I then mounted the magnet directly to the door in front of the sensor. Once I connected them into loop 1 of a couple of 5816 wireless sensors and configured them into my Lynx 5100 as monitor only zones everything worked great. Now I don't have to think about whether I closed the garage door or not any more, just go to my phone and look if the zones are showing as sensor trouble or not....