Frequently Asked Questions
Will Honeywell 5800 Sensors Work on an Interlogix Simon XT?
The Simon XT communicates with wireless sensors that operate at a frequency of 319.5 MHz. Since Honeywell 5800 Sensors operate at a frequency of 345 MHz, they cannot be used with the system. But there are many other sensors that will work instead. Find out which sensors will work with a Simon XT.
How Do I Control Lights w/ an Interlogix Simon XT?
The Simon XT can interface with Z-Wave lights after a Z-Wave controller has been added to the system. The controller comes integrated with the Alarm.com cellular module. In order to integrate with Z-Wave, the Simon XT needs an active cellular plan. Learn more about using Z-Wave with a Simon XT.
Is an Interlogix Simon XT Z-Wave Compatible?
An Interlogix Simon XT can only support Z-Wave devices if a Z-Wave controller is added to the system. This addition comes in the form of a cellular module with an integrated Z-Wave Controller. Once Z-Wave is added, it can be controlled in various ways. Learn how to use Z-Wave with a Simon XT System.
Can I Use an Interlogix Simon XT w/o Monitoring?
If you do not have monitoring, then an Simon XT can only be used as a local alarm. It will not be able to send any alerts to your phone or to a central monitoring station. However, it can still produce local sounds to let on-site users about an alarm event. Learn more about the Simon XT System.
Will Total Connect Work w/ an Interlogix Simon XT?
Total Connect is an interactive service platform that is used exclusively with Honeywell Alarm Systems. Since the Interlogix Simon XT is not manufactured by Honeywell, it cannot use the Total Connect service. But the Simon XT can use Alarm.com instead. Learn more about the Simon XT and Alarm.com.
Will an Interlogix Simon XT Work w/o a Phone Line?
The only way for a Simon XT to receive monitoring without a phone line is with cellular service. Either a phone line or cellular service is needed for the panel to send outbound signals. Also, no communicator is needed to use the panel as a local sounder. Learn more about the Simon XT.
How Do I Add a Wireless Zone to an Interlogix Simon XT?
Wireless zones for an Interlogix Simon XT are configured through the System Programming Menu. With the system in its learn mode, activate the sensor tamper to learn it in. Then configure the settings for that zone. Learn how to enroll a wireless sensor with an Interlogix Simon XT System.
Can I Connect an iPhone to an Interlogix Simon XT?
An iPhone can connect to an Interlogix Simon XT Alarm System using the Alarm.com Mobile App. The Simon XT will need a cellular communicator in order to sync with Alarm.com. Also, the user will require a monitoring plan that includes cellular service. Learn more about the Alarm.com Mobile App.
How Do I Add a Key Fob to an Interlogix Simon XT?
A key fob is enrolled with an Interlogix Simon XT through the System Programming Menu. With the system in its learn more, press and hold the top two buttons on the key fob. This will enroll it with the system. You must then adjust its settings. Learn more about using a key fob with a Simon XT.
How Do I Add Additional User Codes to an Interlogix Simon XT?
The Simon XT System will support up to eight different user codes. These codes are used for arming and disarming the panel, and they are set up through System Programming. You will need to know the Master Code for the system to create new user codes. Learn how to set up user codes on a Simon XT.
The Simon XT communicates with wireless sensors that operate at a frequency of 319.5 MHz. Since Honeywell 5800 Sensors operate at a frequency of 345 MHz, they cannot be used with the system. But there are many other sensors that will work instead. Find out which sensors will work with a Simon XT.
Added:
How Do I Control Lights w/ an Interlogix Simon XT?
The Simon XT can interface with Z-Wave lights after a Z-Wave controller has been added to the system. The controller comes integrated with the Alarm.com cellular module. In order to integrate with Z-Wave, the Simon XT needs an active cellular plan. Learn more about using Z-Wave with a Simon XT.
Added:
Is an Interlogix Simon XT Z-Wave Compatible?
An Interlogix Simon XT can only support Z-Wave devices if a Z-Wave controller is added to the system. This addition comes in the form of a cellular module with an integrated Z-Wave Controller. Once Z-Wave is added, it can be controlled in various ways. Learn how to use Z-Wave with a Simon XT System.
Added:
Can I Use an Interlogix Simon XT w/o Monitoring?
If you do not have monitoring, then an Simon XT can only be used as a local alarm. It will not be able to send any alerts to your phone or to a central monitoring station. However, it can still produce local sounds to let on-site users about an alarm event. Learn more about the Simon XT System.
Added:
Will Total Connect Work w/ an Interlogix Simon XT?
Total Connect is an interactive service platform that is used exclusively with Honeywell Alarm Systems. Since the Interlogix Simon XT is not manufactured by Honeywell, it cannot use the Total Connect service. But the Simon XT can use Alarm.com instead. Learn more about the Simon XT and Alarm.com.
Added:
Will an Interlogix Simon XT Work w/o a Phone Line?
The only way for a Simon XT to receive monitoring without a phone line is with cellular service. Either a phone line or cellular service is needed for the panel to send outbound signals. Also, no communicator is needed to use the panel as a local sounder. Learn more about the Simon XT.
Added:
How Do I Add a Wireless Zone to an Interlogix Simon XT?
Wireless zones for an Interlogix Simon XT are configured through the System Programming Menu. With the system in its learn mode, activate the sensor tamper to learn it in. Then configure the settings for that zone. Learn how to enroll a wireless sensor with an Interlogix Simon XT System.
Added:
Can I Connect an iPhone to an Interlogix Simon XT?
An iPhone can connect to an Interlogix Simon XT Alarm System using the Alarm.com Mobile App. The Simon XT will need a cellular communicator in order to sync with Alarm.com. Also, the user will require a monitoring plan that includes cellular service. Learn more about the Alarm.com Mobile App.
Added:
How Do I Add a Key Fob to an Interlogix Simon XT?
A key fob is enrolled with an Interlogix Simon XT through the System Programming Menu. With the system in its learn more, press and hold the top two buttons on the key fob. This will enroll it with the system. You must then adjust its settings. Learn more about using a key fob with a Simon XT.
Added:
How Do I Add Additional User Codes to an Interlogix Simon XT?
The Simon XT System will support up to eight different user codes. These codes are used for arming and disarming the panel, and they are set up through System Programming. You will need to know the Master Code for the system to create new user codes. Learn how to set up user codes on a Simon XT.
Added: